| Select |
Car Info |
Engine Info |
Turbo Info |
Modifications* |
Owner/Other |
GOT DB CON
|
| Make | Mazda |
| Model | RX-7 |
| Year | 1993 |
| Weight | 2800 |
|
| Engine | 13B |
| Cylinders/Rotors | 2 |
| Valves | 0 |
| Displacement | 1.3 Liters |
| Aspiration | Turbo |
|
| Mfg | Garrett |
Exhaust A/R | |
| Model | T04E |
Compressor A/R | |
| Boost PSI | 13 |
Exhaust Trim | |
| | Compressor Trim | |
|
| Cam | ? |
Intake | M |
| Intercooler | M |
Downpipe | M |
| HighFlow Cat | ? |
Midpipe | ? |
| Cat Back | M |
Street Port | ? |
| Bridge Port | ? |
Peripheral Port | ? |
| Other Port | ? |
|
| Name | |
| Email | |
| WWW | |
| Locations | |
| Other Mods: |
|---|
|
|
|
| Make | Mazda |
| Model | RX-7 |
| Year | 1993 |
| Weight | 2800 |
|
| Engine | 13B |
| Cylinders/Rotors | 2 |
| Valves | 0 |
| Displacement | 1.3 Liters |
| Aspiration | Turbo |
|
| Mfg | |
Exhaust A/R | 1.15 |
| Model | T04S |
Compressor A/R | .7 |
| Boost PSI | 21 |
Exhaust Trim | |
| | Compressor Trim | |
|
| Cam | ? |
Intake | M |
| Intercooler | M |
Downpipe | M |
| HighFlow Cat | ? |
Midpipe | M |
| Cat Back | M |
Street Port | M |
| Bridge Port | S |
Peripheral Port | S |
| Other Port | ? |
|
| Name | Peter Yeung |
| Email | |
| WWW | |
| Locations | |
| Other Mods: |
|---|
|
|
|
| Make | Mazda |
| Model | RX-7 |
| Year | 1993 |
| Weight | 2800 |
|
| Engine | 13B |
| Cylinders/Rotors | 2 |
| Valves | 0 |
| Displacement | 1.3 Liters |
| Aspiration | Turbo |
|
| Mfg | |
Exhaust A/R | .96 |
| Model | T66 |
Compressor A/R | |
| Boost PSI | 17 |
Exhaust Trim | |
| | Compressor Trim | |
|
| Cam | ? |
Intake | M |
| Intercooler | M |
Downpipe | M |
| HighFlow Cat | ? |
Midpipe | ? |
| Cat Back | M |
Street Port | M |
| Bridge Port | S |
Peripheral Port | S |
| Other Port | ? |
|
| Name | Steve Kan |
| Email | |
| WWW | |
| Locations | |
| Other Mods: |
|---|
|
|
|
| Make | Mazda |
| Model | RX-7 |
| Year | |
| Weight | 2800 |
|
| Engine | 13B |
| Cylinders/Rotors | 2 |
| Valves | 0 |
| Displacement | 1.3 Liters |
| Aspiration | Turbo |
|
| Mfg | Garrett |
Exhaust A/R | 1.00 |
| Model | T04S |
Compressor A/R | .70 |
| Boost PSI | 16 |
Exhaust Trim | |
| | Compressor Trim | |
|
| Cam | ? |
Intake | ? |
| Intercooler | ? |
Downpipe | ? |
| HighFlow Cat | ? |
Midpipe | ? |
| Cat Back | ? |
Street Port | M |
| Bridge Port | S |
Peripheral Port | S |
| Other Port | S |
|
| Name | |
| Email | |
| WWW | |
| Locations | |
| Other Mods: |
|---|
|
|
|
| Make | Mazda |
| Model | RX-7 |
| Year | 1993 |
| Weight | 2800 |
|
| Engine | 13B |
| Cylinders/Rotors | 2 |
| Valves | 0 |
| Displacement | 1.3 Liters |
| Aspiration | Turbo |
|
| Mfg | |
Exhaust A/R | |
| Model | T04E |
Compressor A/R | |
| Boost PSI | 14 |
Exhaust Trim | |
| | Compressor Trim | |
|
| Cam | ? |
Intake | M |
| Intercooler | M |
Downpipe | M |
| HighFlow Cat | M |
Midpipe | S |
| Cat Back | M |
Street Port | M |
| Bridge Port | S |
Peripheral Port | S |
| Other Port | S |
|
| Name | Cliff |
| Email | |
| WWW | |
| Locations | |
| Other Mods: |
|---|
|
|
|
| Make | Mazda |
| Model | RX-7 |
| Year | 1993 |
| Weight | 2800 |
|
| Engine | 13B |
| Cylinders/Rotors | 2 |
| Valves | 0 |
| Displacement | 1.3 Liters |
| Aspiration | Turbo |
|
| Mfg | |
Exhaust A/R | |
| Model | T78 |
Compressor A/R | |
| Boost PSI | 17 |
Exhaust Trim | |
| | Compressor Trim | |
|
| Cam | ? |
Intake | M |
| Intercooler | ? |
Downpipe | ? |
| HighFlow Cat | M |
Midpipe | S |
| Cat Back | M |
Street Port | M |
| Bridge Port | S |
Peripheral Port | S |
| Other Port | S |
|
| Name | Rotary Performance |
| Email | |
| WWW | |
| Locations | |
| Other Mods: |
|---|
|
|
|
| Make | Mazda |
| Model | RX-7 |
| Year | 1993 |
| Weight | 2800 |
|
| Engine | 13B |
| Cylinders/Rotors | 2 |
| Valves | 0 |
| Displacement | 1.3 Liters |
| Aspiration | Turbo |
|
| Mfg | |
Exhaust A/R | |
| Model | Stock Twins |
Compressor A/R | |
| Boost PSI | 13 |
Exhaust Trim | |
| | Compressor Trim | |
|
| Cam | ? |
Intake | M |
| Intercooler | M |
Downpipe | ? |
| HighFlow Cat | S |
Midpipe | S |
| Cat Back | M |
Street Port | S |
| Bridge Port | S |
Peripheral Port | S |
| Other Port | S |
|
| Name | XS Engineering pre-T04E kit |
| Email | |
| WWW | |
| Locations | |
| Other Mods: |
|---|
|
|
|
| Make | Mazda |
| Model | RX-7 |
| Year | 1993 |
| Weight | 2800 |
|
| Engine | 13B |
| Cylinders/Rotors | 2 |
| Valves | 0 |
| Displacement | 1.3 Liters |
| Aspiration | Turbo |
|
| Mfg | |
Exhaust A/R | |
| Model | Stock Twins |
Compressor A/R | |
| Boost PSI | 10 |
Exhaust Trim | |
| | Compressor Trim | |
|
| Cam | ? |
Intake | M |
| Intercooler | M |
Downpipe | M |
| HighFlow Cat | S |
Midpipe | M |
| Cat Back | M |
Street Port | M |
| Bridge Port | S |
Peripheral Port | S |
| Other Port | S |
|
| Name | Anthony |
| Email | Elec_Tape@Hotmail.com |
| WWW | http://www.angelfire.com/tx3/rx7/index.html |
| Locations | |
| Other Mods: |
|---|
|
|
|
| Make | Mazda |
| Model | RX-7 |
| Year | 1993 |
| Weight | 2800 |
|
| Engine | 13B |
| Cylinders/Rotors | 2 |
| Valves | 0 |
| Displacement | 1.3 Liters |
| Aspiration | Turbo |
|
| Mfg | |
Exhaust A/R | 1.3 |
| Model | T66 |
Compressor A/R | .7 |
| Boost PSI | 15 |
Exhaust Trim | |
| | Compressor Trim | |
|
| Cam | ? |
Intake | M |
| Intercooler | M |
Downpipe | M |
| HighFlow Cat | ? |
Midpipe | M |
| Cat Back | M |
Street Port | M |
| Bridge Port | S |
Peripheral Port | S |
| Other Port | ? |
|
| Name | Ryan Schlagheck |
| Email | ryan@schlagheck.com |
| WWW | schlagheck.com/rx7/main.html |
| Locations | |
| Other Mods: |
|---|
|
|
|
| Make | Mazda |
| Model | RX-7 |
| Year | |
| Weight | 0 |
|
| Engine | 13B |
| Cylinders/Rotors | 2 |
| Valves | 0 |
| Displacement | 1.3 Liters |
| Aspiration | Turbo |
|
| Mfg | |
Exhaust A/R | |
| Model | |
Compressor A/R | |
| Boost PSI | 14 |
Exhaust Trim | |
| | Compressor Trim | |
|
| Cam | ? |
Intake | M |
| Intercooler | M |
Downpipe | M |
| HighFlow Cat | ? |
Midpipe | ? |
| Cat Back | M |
Street Port | ? |
| Bridge Port | ? |
Peripheral Port | ? |
| Other Port | ? |
|
| Name | rboyd034 |
| Email | |
| WWW | |
| Locations | |
| Other Mods: |
|---|
|
|
|
| Make | Mazda |
| Model | RX-7 |
| Year | |
| Weight | 0 |
|
| Engine | 13B |
| Cylinders/Rotors | 2 |
| Valves | 0 |
| Displacement | 1.3 Liters |
| Aspiration | Turbo |
|
| Mfg | |
Exhaust A/R | |
| Model | T60-1 |
Compressor A/R | |
| Boost PSI | 12 |
Exhaust Trim | |
| | Compressor Trim | |
|
| Cam | ? |
Intake | M |
| Intercooler | M |
Downpipe | M |
| HighFlow Cat | ? |
Midpipe | ? |
| Cat Back | M |
Street Port | ? |
| Bridge Port | ? |
Peripheral Port | ? |
| Other Port | ? |
|
| Name | eric michel |
| Email | |
| WWW | |
| Locations | |
| Other Mods: |
|---|
|
|
|
| Make | Mazda |
| Model | RX-7 |
| Year | 1993 |
| Weight | 2800 |
|
| Engine | 13B |
| Cylinders/Rotors | 2 |
| Valves | 0 |
| Displacement | 1.3 Liters |
| Aspiration | Turbo |
|
| Mfg | |
Exhaust A/R | .96 |
| Model | T70 |
Compressor A/R | |
| Boost PSI | 25 |
Exhaust Trim | |
| | Compressor Trim | |
|
| Cam | ? |
Intake | M |
| Intercooler | M |
Downpipe | M |
| HighFlow Cat | ? |
Midpipe | M |
| Cat Back | M |
Street Port | M |
| Bridge Port | S |
Peripheral Port | S |
| Other Port | ? |
|
| Name | Demetrios Karagiannis |
| Email | dkaragia@hotmail.com |
| WWW | |
| Locations | |
| Other Mods: |
|---|
|
|
|
| Make | Mazda |
| Model | RX-7 |
| Year | 1993 |
| Weight | 2800 |
|
| Engine | 13B |
| Cylinders/Rotors | 2 |
| Valves | 0 |
| Displacement | 1.3 Liters |
| Aspiration | Turbo |
|
| Mfg | |
Exhaust A/R | |
| Model | RX-6 |
Compressor A/R | |
| Boost PSI | 13 |
Exhaust Trim | 60mm major |
| | Compressor Trim | |
|
| Cam | ? |
Intake | M |
| Intercooler | M |
Downpipe | M |
| HighFlow Cat | ? |
Midpipe | M |
| Cat Back | M |
Street Port | M |
| Bridge Port | S |
Peripheral Port | S |
| Other Port | ? |
|
| Name | Max Cooper |
| Email | max@maxcooper.com |
| WWW | www.maxcooper.com |
| Locations | CA, USA |
| Other Mods: |
|---|
|
|
|
| Make | Mazda |
| Model | RX-7 |
| Year | 1993 |
| Weight | 2800 |
|
| Engine | 13B |
| Cylinders/Rotors | 2 |
| Valves | 0 |
| Displacement | 1.3 Liters |
| Aspiration | Turbo |
|
| Mfg | |
Exhaust A/R | |
| Model | KKK |
Compressor A/R | |
| Boost PSI | 20 |
Exhaust Trim | |
| | Compressor Trim | |
|
| Cam | ? |
Intake | M |
| Intercooler | M |
Downpipe | M |
| HighFlow Cat | ? |
Midpipe | M |
| Cat Back | M |
Street Port | M |
| Bridge Port | S |
Peripheral Port | S |
| Other Port | ? |
|
| Name | Shane Racing |
| Email | |
| WWW | www.shaneracing.com |
| Locations | |
| Other Mods: |
|---|
|
|
|
| Make | Mazda |
| Model | RX-7 |
| Year | |
| Weight | 0 |
|
| Engine | 13B |
| Cylinders/Rotors | 2 |
| Valves | 0 |
| Displacement | 1.3 Liters |
| Aspiration | Turbo |
|
| Mfg | |
Exhaust A/R | |
| Model | T60-1 |
Compressor A/R | |
| Boost PSI | 16 |
Exhaust Trim | |
| | Compressor Trim | |
|
| Cam | ? |
Intake | M |
| Intercooler | M |
Downpipe | M |
| HighFlow Cat | ? |
Midpipe | ? |
| Cat Back | M |
Street Port | ? |
| Bridge Port | ? |
Peripheral Port | ? |
| Other Port | ? |
|
| Name | eric michel |
| Email | |
| WWW | |
| Locations | |
| Other Mods: |
|---|
|
|
|
| Make | Mazda |
| Model | RX-7 |
| Year | |
| Weight | 0 |
|
| Engine | 13B |
| Cylinders/Rotors | 2 |
| Valves | 0 |
| Displacement | 1.3 Liters |
| Aspiration | Turbo |
|
| Mfg | |
Exhaust A/R | |
| Model | stock twins |
Compressor A/R | |
| Boost PSI | -999 |
Exhaust Trim | |
| | Compressor Trim | |
|
| Cam | ? |
Intake | M |
| Intercooler | ? |
Downpipe | ? |
| HighFlow Cat | ? |
Midpipe | ? |
| Cat Back | M |
Street Port | S |
| Bridge Port | S |
Peripheral Port | S |
| Other Port | S |
|
| Name | eric michel |
| Email | |
| WWW | |
| Locations | |
| Other Mods: |
|---|
|
|
|
| Make | Mazda |
| Model | RX-7 |
| Year | |
| Weight | 0 |
|
| Engine | 13B |
| Cylinders/Rotors | 2 |
| Valves | 0 |
| Displacement | 1.3 Liters |
| Aspiration | Turbo |
|
| Mfg | |
Exhaust A/R | |
| Model | T60-1 |
Compressor A/R | |
| Boost PSI | 10 |
Exhaust Trim | |
| | Compressor Trim | |
|
| Cam | ? |
Intake | M |
| Intercooler | ? |
Downpipe | ? |
| HighFlow Cat | ? |
Midpipe | ? |
| Cat Back | M |
Street Port | S |
| Bridge Port | S |
Peripheral Port | S |
| Other Port | S |
|
| Name | eric michel |
| Email | |
| WWW | |
| Locations | |
| Other Mods: |
|---|
|
|
|
| Make | Mazda |
| Model | RX-7 |
| Year | |
| Weight | 0 |
|
| Engine | 13B |
| Cylinders/Rotors | 2 |
| Valves | 0 |
| Displacement | 1.3 Liters |
| Aspiration | Turbo |
|
| Mfg | |
Exhaust A/R | |
| Model | T78 |
Compressor A/R | |
| Boost PSI | 17 |
Exhaust Trim | |
| | Compressor Trim | |
|
| Cam | ? |
Intake | M |
| Intercooler | ? |
Downpipe | M |
| HighFlow Cat | ? |
Midpipe | ? |
| Cat Back | M |
Street Port | S |
| Bridge Port | S |
Peripheral Port | S |
| Other Port | S |
|
| Name | eric michel |
| Email | |
| WWW | |
| Locations | |
| Other Mods: |
|---|
|
|
|
| Make | Mazda |
| Model | RX-7 |
| Year | 1993 |
| Weight | 2850 |
|
| Engine | 13B |
| Cylinders/Rotors | 2 |
| Valves | 0 |
| Displacement | 1.3 Liters |
| Aspiration | Turbo |
|
| Mfg | |
Exhaust A/R | 1.00 |
| Model | T04S |
Compressor A/R | 0.70 |
| Boost PSI | 12 |
Exhaust Trim | P |
| | Compressor Trim | |
|
| Cam | ? |
Intake | M |
| Intercooler | M |
Downpipe | M |
| HighFlow Cat | ? |
Midpipe | M |
| Cat Back | M |
Street Port | M |
| Bridge Port | S |
Peripheral Port | S |
| Other Port | S |
|
| Name | Wargasm on rx7club.com |
| Email | rx7dyno@zeroglabs.com |
| WWW | www.zeroglabs.com |
| Locations | Maryland, USA |
| Other Mods: |
|---|
|
|
|
| Make | Mazda |
| Model | RX-7 |
| Year | 1987 |
| Weight | 3000 |
|
| Engine | 20B |
| Cylinders/Rotors | 3 |
| Valves | 0 |
| Displacement | 2.0 Liters |
| Aspiration | Turbo |
|
| Mfg | |
Exhaust A/R | |
| Model | T64 |
Compressor A/R | |
| Boost PSI | 10 |
Exhaust Trim | |
| | Compressor Trim | |
|
| Cam | ? |
Intake | M |
| Intercooler | M |
Downpipe | M |
| HighFlow Cat | ? |
Midpipe | M |
| Cat Back | M |
Street Port | S |
| Bridge Port | S |
Peripheral Port | S |
| Other Port | S |
|
| Name | Chito Solomon |
| Email | rx720b@aol.com |
| WWW | |
| Locations | Los Angeles, CA, USA |
| Other Mods: |
|---|
|
|
|
| Make | Mazda |
| Model | RX-7 |
| Year | 1993 |
| Weight | 2800 |
|
| Engine | 13B |
| Cylinders/Rotors | 2 |
| Valves | 0 |
| Displacement | 1.3 Liters |
| Aspiration | Twin Turbo |
|
| Mfg | stock twins |
Exhaust A/R | |
| Model | stock twins |
Compressor A/R | |
| Boost PSI | 13 |
Exhaust Trim | |
| | Compressor Trim | |
|
| Cam | ? |
Intake | M |
| Intercooler | M |
Downpipe | M |
| HighFlow Cat | ? |
Midpipe | M |
| Cat Back | M |
Street Port | M |
| Bridge Port | S |
Peripheral Port | S |
| Other Port | S |
|
| Name | Ryan |
| Email | |
| WWW | www.dontbearikki.com |
| Locations | PG County, Maryland |
| Other Mods: |
|---|
| non-sequential turbos |
|
|
| Make | Mazda |
| Model | RX-7 |
| Year | 1994 |
| Weight | 2800 |
|
| Engine | 13B |
| Cylinders/Rotors | 2 |
| Valves | 0 |
| Displacement | 1.3 Liters |
| Aspiration | Twin Turbo |
|
| Mfg | stock twins |
Exhaust A/R | |
| Model | stock twins |
Compressor A/R | |
| Boost PSI | 10 |
Exhaust Trim | |
| | Compressor Trim | |
|
| Cam | ? |
Intake | S |
| Intercooler | S |
Downpipe | S |
| HighFlow Cat | S |
Midpipe | S |
| Cat Back | M |
Street Port | S |
| Bridge Port | S |
Peripheral Port | S |
| Other Port | S |
|
| Name | Duane |
| Email | |
| WWW | http://www.geocities.com/MotorCity/Garage/8255/porktorq.html |
| Locations | |
| Other Mods: |
|---|
|
|
|
| Make | Mazda |
| Model | RX-7 |
| Year | 1994 |
| Weight | 2800 |
|
| Engine | 13B |
| Cylinders/Rotors | 2 |
| Valves | 0 |
| Displacement | 1.3 Liters |
| Aspiration | Twin Turbo |
|
| Mfg | stock twins |
Exhaust A/R | |
| Model | stock twins |
Compressor A/R | |
| Boost PSI | 10 |
Exhaust Trim | |
| | Compressor Trim | |
|
| Cam | ? |
Intake | S |
| Intercooler | S |
Downpipe | S |
| HighFlow Cat | S |
Midpipe | S |
| Cat Back | S |
Street Port | S |
| Bridge Port | S |
Peripheral Port | S |
| Other Port | S |
|
| Name | Dave |
| Email | |
| WWW | http://www.geocities.com/MotorCity/Garage/8255/porktorq.html |
| Locations | |
| Other Mods: |
|---|
|
|
|
| Make | Mazda |
| Model | RX-7 |
| Year | 1994 |
| Weight | 2800 |
|
| Engine | 13B |
| Cylinders/Rotors | 2 |
| Valves | 0 |
| Displacement | 1.3 Liters |
| Aspiration | Twin Turbo |
|
| Mfg | stock twins |
Exhaust A/R | |
| Model | stock twins |
Compressor A/R | |
| Boost PSI | 10 |
Exhaust Trim | |
| | Compressor Trim | |
|
| Cam | ? |
Intake | S |
| Intercooler | S |
Downpipe | S |
| HighFlow Cat | S |
Midpipe | S |
| Cat Back | S |
Street Port | S |
| Bridge Port | S |
Peripheral Port | S |
| Other Port | S |
|
| Name | Kevin |
| Email | |
| WWW | http://www.geocities.com/MotorCity/Garage/8255/porktorq.html |
| Locations | |
| Other Mods: |
|---|
|
|
|
| Make | Mazda |
| Model | RX-7 |
| Year | 1993 |
| Weight | 2800 |
|
| Engine | 13B |
| Cylinders/Rotors | 2 |
| Valves | 0 |
| Displacement | 1.3 Liters |
| Aspiration | Twin Turbo |
|
| Mfg | stock twins |
Exhaust A/R | |
| Model | stock twins |
Compressor A/R | |
| Boost PSI | 13 |
Exhaust Trim | |
| | Compressor Trim | |
|
| Cam | ? |
Intake | M |
| Intercooler | M |
Downpipe | M |
| HighFlow Cat | ? |
Midpipe | M |
| Cat Back | M |
Street Port | M |
| Bridge Port | S |
Peripheral Port | S |
| Other Port | S |
|
| Name | Ernie T |
| Email | |
| WWW | |
| Locations | Maryland, USA |
| Other Mods: |
|---|
| non-sequential turbos |
|
|
| Make | mazda |
| Model | RX-7 |
| Year | 1994 |
| Weight | 2800 |
|
| Engine | 13B |
| Cylinders/Rotors | 2 |
| Valves | 0 |
| Displacement | 1.3 Liters |
| Aspiration | Twin Turbo |
|
| Mfg | stock twins |
Exhaust A/R | |
| Model | stock twins |
Compressor A/R | |
| Boost PSI | -999 |
Exhaust Trim | |
| | Compressor Trim | |
|
| Cam | ? |
Intake | M |
| Intercooler | S |
Downpipe | M |
| HighFlow Cat | S |
Midpipe | ? |
| Cat Back | S |
Street Port | ? |
| Bridge Port | ? |
Peripheral Port | ? |
| Other Port | ? |
|
| Name | Troy Casey |
| Email | troy.casey@ndchealth.com |
| WWW | |
| Locations | |
| Other Mods: |
|---|
|
|
|
| Make | Mazda |
| Model | RX-7 |
| Year | 1993 |
| Weight | 2800 |
|
| Engine | 13B |
| Cylinders/Rotors | 2 |
| Valves | 0 |
| Displacement | 1.3 Liters |
| Aspiration | Turbo |
|
| Mfg | |
Exhaust A/R | |
| Model | KKK "stage 2" from SR Motorsports |
Compressor A/R | |
| Boost PSI | 10 |
Exhaust Trim | |
| | Compressor Trim | |
|
| Cam | ? |
Intake | M |
| Intercooler | M |
Downpipe | M |
| HighFlow Cat | ? |
Midpipe | M |
| Cat Back | M |
Street Port | M |
| Bridge Port | ? |
Peripheral Port | ? |
| Other Port | ? |
|
| Name | Ernie T |
| Email | |
| WWW | |
| Locations | Maryland, USA |
| Other Mods: |
|---|
|
|
|
| Make | Mazda |
| Model | RX-7 |
| Year | 1993 |
| Weight | 2800 |
|
| Engine | 13B |
| Cylinders/Rotors | 2 |
| Valves | 0 |
| Displacement | 1.3 Liters |
| Aspiration | Turbo |
|
| Mfg | |
Exhaust A/R | 1.00 |
| Model | T04S |
Compressor A/R | 0.70 |
| Boost PSI | 15 |
Exhaust Trim | P |
| | Compressor Trim | |
|
| Cam | ? |
Intake | M |
| Intercooler | M |
Downpipe | M |
| HighFlow Cat | ? |
Midpipe | M |
| Cat Back | M |
Street Port | M |
| Bridge Port | ? |
Peripheral Port | ? |
| Other Port | ? |
|
| Name | Wargasm on rx7club.com |
| Email | rx7dyno@zeroglabs.com |
| WWW | www.zeroglabs.com |
| Locations | Maryland, USA |
| Other Mods: |
|---|
|
|
|
| Make | Mazda |
| Model | RX-7 |
| Year | 1987 |
| Weight | 2850 |
|
| Engine | 13B |
| Cylinders/Rotors | 2 |
| Valves | 0 |
| Displacement | 1.3 Liters |
| Aspiration | Turbo |
|
| Mfg | Stock Hitachi |
Exhaust A/R | |
| Model | Stock Hitachi |
Compressor A/R | |
| Boost PSI | 6 |
Exhaust Trim | |
| | Compressor Trim | |
|
| Cam | ? |
Intake | M |
| Intercooler | S |
Downpipe | S |
| HighFlow Cat | S |
Midpipe | S |
| Cat Back | S |
Street Port | S |
| Bridge Port | S |
Peripheral Port | S |
| Other Port | S |
|
| Name | Tec on rx7forum.com |
| Email | |
| WWW | |
| Locations | Fort Collins, CO, USA |
| Other Mods: |
|---|
|
|
|
| Make | Mazda |
| Model | RX-7 |
| Year | 1989 |
| Weight | 2800 |
|
| Engine | 13B |
| Cylinders/Rotors | 2 |
| Valves | 0 |
| Displacement | 1.3 Liters |
| Aspiration | Turbo |
|
| Mfg | Stock Turbo |
Exhaust A/R | |
| Model | Stock Turbo |
Compressor A/R | |
| Boost PSI | 7 |
Exhaust Trim | |
| | Compressor Trim | |
|
| Cam | ? |
Intake | ? |
| Intercooler | ? |
Downpipe | ? |
| HighFlow Cat | ? |
Midpipe | ? |
| Cat Back | ? |
Street Port | ? |
| Bridge Port | ? |
Peripheral Port | ? |
| Other Port | ? |
|
| Name | |
| Email | |
| WWW | |
| Locations | |
| Other Mods: |
|---|
|
|
|
| Make | Mazda |
| Model | RX-7 |
| Year | ? |
| Weight | 0 |
|
| Engine | 20B |
| Cylinders/Rotors | 3 |
| Valves | 0 |
| Displacement | 2.0 Liters |
| Aspiration | Turbo |
|
| Mfg | single of some kind |
Exhaust A/R | |
| Model | |
Compressor A/R | |
| Boost PSI | -999 |
Exhaust Trim | |
| | Compressor Trim | |
|
| Cam | ? |
Intake | ? |
| Intercooler | ? |
Downpipe | ? |
| HighFlow Cat | ? |
Midpipe | ? |
| Cat Back | ? |
Street Port | ? |
| Bridge Port | ? |
Peripheral Port | ? |
| Other Port | ? |
|
| Name | Atkins Rotary |
| Email | |
| WWW | |
| Locations | |
| Other Mods: |
|---|
|
|
|
| Make | Mazda |
| Model | RX-7 |
| Year | 1994 |
| Weight | 2800 |
|
| Engine | 13B |
| Cylinders/Rotors | 2 |
| Valves | 0 |
| Displacement | 1.3 Liters |
| Aspiration | Twin Turbo |
|
| Mfg | Stock Twins |
Exhaust A/R | |
| Model | Stock Twins |
Compressor A/R | |
| Boost PSI | 8 |
Exhaust Trim | |
| | Compressor Trim | |
|
| Cam | ? |
Intake | M |
| Intercooler | S |
Downpipe | M |
| HighFlow Cat | S |
Midpipe | ? |
| Cat Back | M |
Street Port | S |
| Bridge Port | S |
Peripheral Port | S |
| Other Port | S |
|
| Name | QBall on rx7forum.com |
| Email | |
| WWW | |
| Locations | San Diego, CA, USA |
| Other Mods: |
|---|
| 10 psi on primary, 14 psi spike, 8 psi to redline |
|
|
| Make | Mazda |
| Model | RX-7 |
| Year | 1994 |
| Weight | 2800 |
|
| Engine | 13B |
| Cylinders/Rotors | 2 |
| Valves | 0 |
| Displacement | 1.3 Liters |
| Aspiration | Turbo |
|
| Mfg | |
Exhaust A/R | 1.00 |
| Model | T04S |
Compressor A/R | 0.70 |
| Boost PSI | 13 |
Exhaust Trim | |
| | Compressor Trim | |
|
| Cam | ? |
Intake | M |
| Intercooler | M |
Downpipe | M |
| HighFlow Cat | ? |
Midpipe | M |
| Cat Back | M |
Street Port | M |
| Bridge Port | S |
Peripheral Port | S |
| Other Port | S |
|
| Name | machinehead on rx7forum.com |
| Email | |
| WWW | |
| Locations | |
| Other Mods: |
|---|
|
|
|
| Make | Mazda |
| Model | RX-7 |
| Year | 1994 |
| Weight | 2800 |
|
| Engine | 13B |
| Cylinders/Rotors | 2 |
| Valves | 0 |
| Displacement | 1.3 Liters |
| Aspiration | Turbo |
|
| Mfg | |
Exhaust A/R | 1.00 |
| Model | T04S |
Compressor A/R | 0.70 |
| Boost PSI | 15 |
Exhaust Trim | |
| | Compressor Trim | |
|
| Cam | ? |
Intake | M |
| Intercooler | M |
Downpipe | M |
| HighFlow Cat | ? |
Midpipe | M |
| Cat Back | M |
Street Port | M |
| Bridge Port | S |
Peripheral Port | S |
| Other Port | S |
|
| Name | machinehead on rx7forum.com |
| Email | |
| WWW | |
| Locations | |
| Other Mods: |
|---|
|
|
|
| Make | Mazda |
| Model | RX-7 |
| Year | 1990 |
| Weight | 3340 |
|
| Engine | 20B |
| Cylinders/Rotors | 3 |
| Valves | 0 |
| Displacement | 2.0 Liters |
| Aspiration | Twin Turbo |
|
| Mfg | stock cosmo twins |
Exhaust A/R | |
| Model | stock cosmo twins |
Compressor A/R | |
| Boost PSI | 10 |
Exhaust Trim | |
| | Compressor Trim | |
|
| Cam | ? |
Intake | M |
| Intercooler | M |
Downpipe | ? |
| HighFlow Cat | M |
Midpipe | ? |
| Cat Back | S |
Street Port | S |
| Bridge Port | S |
Peripheral Port | S |
| Other Port | S |
|
| Name | George Samuels |
| Email | asam@cris.com |
| WWW | http://www.cris.com/~Asam/20B.html |
| Locations | Westminster, MD, USA |
| Other Mods: |
|---|
|
|
|
| Make | Mazda |
| Model | RX-7 |
| Year | 1990 |
| Weight | 3340 |
|
| Engine | 20B |
| Cylinders/Rotors | 3 |
| Valves | 0 |
| Displacement | 2.0 Liters |
| Aspiration | Twin Turbo |
|
| Mfg | stock cosmo twins |
Exhaust A/R | |
| Model | stock cosmo twins |
Compressor A/R | |
| Boost PSI | 15 |
Exhaust Trim | |
| | Compressor Trim | |
|
| Cam | ? |
Intake | M |
| Intercooler | M |
Downpipe | ? |
| HighFlow Cat | M |
Midpipe | ? |
| Cat Back | S |
Street Port | S |
| Bridge Port | S |
Peripheral Port | S |
| Other Port | S |
|
| Name | George Samuels |
| Email | asam@cris.com |
| WWW | http://www.cris.com/~Asam/20B.html |
| Locations | Westminster, MD, USA |
| Other Mods: |
|---|
|
|
|
| Make | Mazda |
| Model | RX-7 |
| Year | 1993 |
| Weight | 2800 |
|
| Engine | 13B |
| Cylinders/Rotors | 2 |
| Valves | 0 |
| Displacement | 1.3 Liters |
| Aspiration | Twin Turbo |
|
| Mfg | stock twins |
Exhaust A/R | |
| Model | stock twins |
Compressor A/R | |
| Boost PSI | 11 |
Exhaust Trim | |
| | Compressor Trim | |
|
| Cam | ? |
Intake | M |
| Intercooler | M |
Downpipe | M |
| HighFlow Cat | ? |
Midpipe | M |
| Cat Back | M |
Street Port | M |
| Bridge Port | ? |
Peripheral Port | ? |
| Other Port | ? |
|
| Name | Ryan Harsha |
| Email | dontbearikki@aol.com |
| WWW | www.dontbearikki.com |
| Locations | Waldorf, MD, USA |
| Other Mods: |
|---|
| non-sequential turbos, Race Fuel |
|
|
| Make | Mazda |
| Model | RX-7 |
| Year | |
| Weight | 2800 |
|
| Engine | 13B |
| Cylinders/Rotors | 2 |
| Valves | 0 |
| Displacement | 1.3 Liters |
| Aspiration | Turbo |
|
| Mfg | Garrett? |
Exhaust A/R | 1.32 |
| Model | Custom Spec'ed |
Compressor A/R | |
| Boost PSI | 20 |
Exhaust Trim | P |
| | Compressor Trim | |
|
| Cam | ? |
Intake | M |
| Intercooler | M |
Downpipe | M |
| HighFlow Cat | ? |
Midpipe | M |
| Cat Back | ? |
Street Port | M |
| Bridge Port | ? |
Peripheral Port | ? |
| Other Port | ? |
|
| Name | Pete (Rice Racing on rx7forum.com) |
| Email | |
| WWW | |
| Locations | Australia |
| Other Mods: |
|---|
|
|
|
| Make | Mazda |
| Model | RX-7 |
| Year | 1995 |
| Weight | 2800 |
|
| Engine | 13B |
| Cylinders/Rotors | 2 |
| Valves | 0 |
| Displacement | 1.3 Liters |
| Aspiration | Twin Turbo |
|
| Mfg | Stock Twins |
Exhaust A/R | |
| Model | Stock Twins |
Compressor A/R | |
| Boost PSI | 10 |
Exhaust Trim | |
| | Compressor Trim | |
|
| Cam | ? |
Intake | S |
| Intercooler | S |
Downpipe | M |
| HighFlow Cat | S |
Midpipe | S |
| Cat Back | M |
Street Port | S |
| Bridge Port | S |
Peripheral Port | S |
| Other Port | S |
|
| Name | Rynberg on rx7forum.com |
| Email | |
| WWW | |
| Locations | San Lorenzo, CA, USA |
| Other Mods: |
|---|
| Boost falls to 7 after 6K RPM |
|
|
| Make | Mazda |
| Model | RX-7 |
| Year | 1994 |
| Weight | 2800 |
|
| Engine | 13B |
| Cylinders/Rotors | 2 |
| Valves | 0 |
| Displacement | 1.3 Liters |
| Aspiration | Twin Turbo |
|
| Mfg | Stock Twins |
Exhaust A/R | |
| Model | Stock Twins |
Compressor A/R | |
| Boost PSI | 12 |
Exhaust Trim | |
| | Compressor Trim | |
|
| Cam | ? |
Intake | M |
| Intercooler | M |
Downpipe | M |
| HighFlow Cat | M |
Midpipe | S |
| Cat Back | M |
Street Port | S |
| Bridge Port | S |
Peripheral Port | S |
| Other Port | S |
|
| Name | Zerobanger on rx7forum.com |
| Email | |
| WWW | |
| Locations | San Leandro, CA, USA |
| Other Mods: |
|---|
|
|
|
| Make | Mazda |
| Model | RX-7 |
| Year | 1993 |
| Weight | 2850 |
|
| Engine | 13B |
| Cylinders/Rotors | 2 |
| Valves | 0 |
| Displacement | 1.3 Liters |
| Aspiration | Twin Turbo |
|
| Mfg | stock twins |
Exhaust A/R | |
| Model | stock twins |
Compressor A/R | |
| Boost PSI | 11 |
Exhaust Trim | |
| | Compressor Trim | |
|
| Cam | ? |
Intake | M |
| Intercooler | M |
Downpipe | M |
| HighFlow Cat | ? |
Midpipe | ? |
| Cat Back | M |
Street Port | S |
| Bridge Port | S |
Peripheral Port | S |
| Other Port | S |
|
| Name | |
| Email | dis1@oco.net |
| WWW | http://tiger.towson.edu/~csaftn1/dyno.html |
| Locations | |
| Other Mods: |
|---|
|
|
|
| Make | Mazda |
| Model | RX-7 |
| Year | 1993 |
| Weight | 2850 |
|
| Engine | Rotary |
| Cylinders/Rotors | 2 |
| Valves | 0 |
| Displacement | 1.3 liters |
| Aspiration | Turbo |
|
| Mfg | Garrett |
Exhaust A/R | 1.06 |
| Model | GT 35/40 |
Compressor A/R | |
| Boost PSI | 15 |
Exhaust Trim | |
| | Compressor Trim | |
|
| Cam | ? |
Intake | M |
| Intercooler | M |
Downpipe | M |
| HighFlow Cat | ? |
Midpipe | M |
| Cat Back | ? |
Street Port | M |
| Bridge Port | ? |
Peripheral Port | ? |
| Other Port | ? |
|
| Name | Silver93TT on rx7forum.com ; Ihor |
| Email | |
| WWW | www.gothamracing.com |
| Locations | Clifton, NJ, USA |
| Other Mods: |
|---|
|
|
|
| Make | Mazda |
| Model | RX-7 |
| Year | 1994 |
| Weight | 2850 |
|
| Engine | Rotary |
| Cylinders/Rotors | 2 |
| Valves | 0 |
| Displacement | 1.3 liters |
| Aspiration | Turbo |
|
| Mfg | Garrett |
Exhaust A/R | 1.06 |
| Model | GT 35/40 |
Compressor A/R | |
| Boost PSI | 16 |
Exhaust Trim | |
| | Compressor Trim | |
|
| Cam | ? |
Intake | M |
| Intercooler | M |
Downpipe | M |
| HighFlow Cat | ? |
Midpipe | M |
| Cat Back | M |
Street Port | S |
| Bridge Port | S |
Peripheral Port | S |
| Other Port | S |
|
| Name | Toy on rx7forum.com |
| Email | |
| WWW | |
| Locations | Massachusetts, USA |
| Other Mods: |
|---|
| 4.33 gears |
|
|
| Make | Mazda |
| Model | RX-7 |
| Year | 1993 |
| Weight | 2800 |
|
| Engine | Rotary |
| Cylinders/Rotors | 2 |
| Valves | 0 |
| Displacement | 1.3 liters |
| Aspiration | Turbo |
|
| Mfg | Garrett |
Exhaust A/R | 1.15 |
| Model | T88 |
Compressor A/R | |
| Boost PSI | 26 |
Exhaust Trim | |
| | Compressor Trim | |
|
| Cam | ? |
Intake | M |
| Intercooler | M |
Downpipe | M |
| HighFlow Cat | ? |
Midpipe | M |
| Cat Back | M |
Street Port | M |
| Bridge Port | ? |
Peripheral Port | ? |
| Other Port | ? |
|
| Name | T88Kid on rx7forum.com |
| Email | |
| WWW | |
| Locations | New York, NY, USA |
| Other Mods: |
|---|
| Race Gas; Tuning not 100% done |
|
|
| Make | Mazda |
| Model | RX-7 |
| Year | 1993 |
| Weight | 2800 |
|
| Engine | Rotary |
| Cylinders/Rotors | 2 |
| Valves | 0 |
| Displacement | 1.3 liters |
| Aspiration | Turbo |
|
| Mfg | Apexi |
Exhaust A/R | |
| Model | RX-6 |
Compressor A/R | |
| Boost PSI | 18 |
Exhaust Trim | |
| | Compressor Trim | |
|
| Cam | ? |
Intake | M |
| Intercooler | M |
Downpipe | M |
| HighFlow Cat | ? |
Midpipe | M |
| Cat Back | M |
Street Port | M |
| Bridge Port | ? |
Peripheral Port | ? |
| Other Port | ? |
|
| Name | Cheuk in Seoul on rx7forum.com |
| Email | |
| WWW | |
| Locations | |
| Other Mods: |
|---|
| uncorrected numbers |
|
|
| Make | Mazda |
| Model | RX-7 |
| Year | 1987 |
| Weight | 2800 |
|
| Engine | Rotary |
| Cylinders/Rotors | 2 |
| Valves | 0 |
| Displacement | 1.3 liters |
| Aspiration | Turbo |
|
| Mfg | Garrett |
Exhaust A/R | |
| Model | T04E |
Compressor A/R | |
| Boost PSI | 9 |
Exhaust Trim | |
| | Compressor Trim | |
|
| Cam | ? |
Intake | M |
| Intercooler | ? |
Downpipe | M |
| HighFlow Cat | ? |
Midpipe | M |
| Cat Back | M |
Street Port | ? |
| Bridge Port | ? |
Peripheral Port | ? |
| Other Port | ? |
|
| Name | Jims5543 on www.nopistons.com |
| Email | |
| WWW | |
| Locations | |
| Other Mods: |
|---|
| Bad Compression - Rear Rotor; 720 cc Secondaries |
|
|
| Make | Mazda |
| Model | RX-7 |
| Year | 1993 |
| Weight | 2800 |
|
| Engine | Rotary |
| Cylinders/Rotors | 2 |
| Valves | 0 |
| Displacement | 1.3 Liters |
| Aspiration | Twin Turbo |
|
| Mfg | Stock Twins |
Exhaust A/R | |
| Model | Stock Twins |
Compressor A/R | |
| Boost PSI | 15 |
Exhaust Trim | |
| | Compressor Trim | |
|
| Cam | ? |
Intake | M |
| Intercooler | M |
Downpipe | M |
| HighFlow Cat | M |
Midpipe | ? |
| Cat Back | M |
Street Port | M |
| Bridge Port | ? |
Peripheral Port | ? |
| Other Port | ? |
|
| Name | Dick Lambert |
| Email | dlambert@dcwis.com |
| WWW | |
| Locations | Wisconsin, USA |
| Other Mods: |
|---|
|
|
|
| Make | Mazda |
| Model | RX-7 |
| Year | 1993 |
| Weight | 2800 |
|
| Engine | Rotary |
| Cylinders/Rotors | 2 |
| Valves | 0 |
| Displacement | 1.3 liters |
| Aspiration | Turbo |
|
| Mfg | Garrett |
Exhaust A/R | |
| Model | T78 |
Compressor A/R | |
| Boost PSI | 15 |
Exhaust Trim | |
| | Compressor Trim | |
|
| Cam | ? |
Intake | M |
| Intercooler | M |
Downpipe | M |
| HighFlow Cat | ? |
Midpipe | M |
| Cat Back | M |
Street Port | M |
| Bridge Port | ? |
Peripheral Port | ? |
| Other Port | ? |
|
| Name | Roy Johnson |
| Email | |
| WWW | http://www.royjohnsonjr.com/index.htm |
| Locations | |
| Other Mods: |
|---|
| Alcohol/Water Injection |
|
|
| Make | Mazda |
| Model | RX-7 |
| Year | 1993 |
| Weight | 2800 |
|
| Engine | Rotary |
| Cylinders/Rotors | 2 |
| Valves | 0 |
| Displacement | 1.3 liters |
| Aspiration | Turbo |
|
| Mfg | Garrett |
Exhaust A/R | |
| Model | T78 |
Compressor A/R | |
| Boost PSI | 17 |
Exhaust Trim | |
| | Compressor Trim | |
|
| Cam | ? |
Intake | M |
| Intercooler | M |
Downpipe | M |
| HighFlow Cat | ? |
Midpipe | M |
| Cat Back | M |
Street Port | M |
| Bridge Port | ? |
Peripheral Port | ? |
| Other Port | ? |
|
| Name | Roy Johnson |
| Email | |
| WWW | http://www.royjohnsonjr.com/index.htm |
| Locations | |
| Other Mods: |
|---|
| Alcohol/Water Injection |
|
|
| Make | Mazda |
| Model | RX-7 |
| Year | 1994 |
| Weight | 2800 |
|
| Engine | Rotary |
| Cylinders/Rotors | 2 |
| Valves | 0 |
| Displacement | 1.3 liters |
| Aspiration | Turbo |
|
| Mfg | Garrett |
Exhaust A/R | |
| Model | T04E |
Compressor A/R | |
| Boost PSI | 14 |
Exhaust Trim | |
| | Compressor Trim | |
|
| Cam | ? |
Intake | M |
| Intercooler | M |
Downpipe | M |
| HighFlow Cat | ? |
Midpipe | M |
| Cat Back | M |
Street Port | M |
| Bridge Port | ? |
Peripheral Port | ? |
| Other Port | ? |
|
| Name | Ken (luv94rx7 on rx7forum.com) |
| Email | |
| WWW | http://nopistons.com/luv94rx7.html |
| Locations | |
| Other Mods: |
|---|
|
|
|
| Make | Mazda |
| Model | RX-7 |
| Year | 1987 |
| Weight | 2600 |
|
| Engine | Rotary |
| Cylinders/Rotors | 2 |
| Valves | 0 |
| Displacement | 1.3 liters |
| Aspiration | Turbo |
|
| Mfg | |
Exhaust A/R | |
| Model | T72 |
Compressor A/R | |
| Boost PSI | 26 |
Exhaust Trim | |
| | Compressor Trim | |
|
| Cam | ? |
Intake | M |
| Intercooler | M |
Downpipe | M |
| HighFlow Cat | ? |
Midpipe | M |
| Cat Back | M |
Street Port | ? |
| Bridge Port | M |
Peripheral Port | ? |
| Other Port | ? |
|
| Name | Crispeed on rx7forum.com |
| Email | |
| WWW | |
| Locations | Miami, FL, USA |
| Other Mods: |
|---|
| Alcohol fueled |
|
|
| Make | 1988 |
| Model | Mazda |
| Year | RX-7 |
| Weight | 3100 |
|
| Engine | Small Block Chevy 383 |
| Cylinders/Rotors | 8 |
| Valves | 16 |
| Displacement | 383 cubic inches |
| Aspiration | NA |
|
| Mfg | none |
Exhaust A/R | |
| Model | none |
Compressor A/R | |
| Boost PSI | -999 |
Exhaust Trim | |
| | Compressor Trim | |
|
| Cam | ? |
Intake | ? |
| Intercooler | ? |
Downpipe | ? |
| HighFlow Cat | ? |
Midpipe | ? |
| Cat Back | ? |
Street Port | ? |
| Bridge Port | ? |
Peripheral Port | ? |
| Other Port | ? |
|
| Name | mizeru on rx7forum.com |
| Email | |
| WWW | |
| Locations | Atlanta, GA, USA |
| Other Mods: |
|---|
| V8 Engine/Drivetrain Swap |
|
|
| Make | Mazda |
| Model | RX-7 |
| Year | 1993 |
| Weight | 2800 |
|
| Engine | Rotary |
| Cylinders/Rotors | 2 |
| Valves | 0 |
| Displacement | 1.3 liters |
| Aspiration | Turbo |
|
| Mfg | Garrett |
Exhaust A/R | |
| Model | T04S |
Compressor A/R | |
| Boost PSI | 13 |
Exhaust Trim | |
| | Compressor Trim | |
|
| Cam | ? |
Intake | M |
| Intercooler | M |
Downpipe | M |
| HighFlow Cat | M |
Midpipe | ? |
| Cat Back | ? |
Street Port | S |
| Bridge Port | S |
Peripheral Port | S |
| Other Port | ? |
|
| Name | Shawn |
| Email | |
| WWW | www.3rdgenrx7.com |
| Locations | |
| Other Mods: |
|---|
|
|
|
| Make | Mazda |
| Model | RX-7 |
| Year | 1993 |
| Weight | 2800 |
|
| Engine | Rotary |
| Cylinders/Rotors | 2 |
| Valves | 0 |
| Displacement | 1.3 liters |
| Aspiration | Turbo |
|
| Mfg | |
Exhaust A/R | |
| Model | T78 |
Compressor A/R | |
| Boost PSI | 14 |
Exhaust Trim | |
| | Compressor Trim | |
|
| Cam | ? |
Intake | M |
| Intercooler | M |
Downpipe | M |
| HighFlow Cat | ? |
Midpipe | ? |
| Cat Back | ? |
Street Port | M |
| Bridge Port | ? |
Peripheral Port | ? |
| Other Port | ? |
|
| Name | al900rr on rx7forum.com |
| Email | |
| WWW | |
| Locations | |
| Other Mods: |
|---|
| 3 mm seals |
|
|
| Make | Mazda |
| Model | RX-7 |
| Year | 1993 |
| Weight | 2800 |
|
| Engine | Rotary |
| Cylinders/Rotors | 2 |
| Valves | 0 |
| Displacement | 1.3 liters |
| Aspiration | Turbo |
|
| Mfg | |
Exhaust A/R | |
| Model | T78 |
Compressor A/R | |
| Boost PSI | 20 |
Exhaust Trim | |
| | Compressor Trim | |
|
| Cam | ? |
Intake | M |
| Intercooler | M |
Downpipe | M |
| HighFlow Cat | ? |
Midpipe | ? |
| Cat Back | ? |
Street Port | M |
| Bridge Port | ? |
Peripheral Port | ? |
| Other Port | ? |
|
| Name | al900rr on rx7forum.com |
| Email | |
| WWW | |
| Locations | |
| Other Mods: |
|---|
| 3 mm seals |
|
|
| Make | Mazda |
| Model | RX-7 |
| Year | 1993 |
| Weight | 2800 |
|
| Engine | Rotary |
| Cylinders/Rotors | 2 |
| Valves | 0 |
| Displacement | 1.3 liters |
| Aspiration | Turbo |
|
| Mfg | Garrett |
Exhaust A/R | |
| Model | GT 35/40 |
Compressor A/R | |
| Boost PSI | 20 |
Exhaust Trim | |
| | Compressor Trim | |
|
| Cam | ? |
Intake | M |
| Intercooler | M |
Downpipe | M |
| HighFlow Cat | ? |
Midpipe | M |
| Cat Back | M |
Street Port | M |
| Bridge Port | ? |
Peripheral Port | ? |
| Other Port | ? |
|
| Name | Silver Ninety Three on rx7forum.com |
| Email | |
| WWW | |
| Locations | New Jersey, USA |
| Other Mods: |
|---|
| Race Gas |
|
|
| Make | Mazda |
| Model | RX-7 |
| Year | 1994 |
| Weight | 2887 |
|
| Engine | Rotary |
| Cylinders/Rotors | 2 |
| Valves | 0 |
| Displacement | 1.3 Liters |
| Aspiration | Twin Turbo |
|
| Mfg | Stock Twins |
Exhaust A/R | |
| Model | |
Compressor A/R | |
| Boost PSI | 12 |
Exhaust Trim | |
| | Compressor Trim | |
|
| Cam | ? |
Intake | M |
| Intercooler | M |
Downpipe | M |
| HighFlow Cat | ? |
Midpipe | M |
| Cat Back | M |
Street Port | ? |
| Bridge Port | ? |
Peripheral Port | ? |
| Other Port | M |
|
| Name | Tony K. (aka Badog) |
| Email | badogobad@yahoo.com |
| WWW | http://home.columbus.rr.com/dv8 |
| Locations | Ohio, USA |
| Other Mods: |
|---|
| Ignition, Pulleys, BPU++ |
|
|
| Make | Mazda |
| Model | RX-7 |
| Year | 1993 |
| Weight | 2800 |
|
| Engine | Rotary |
| Cylinders/Rotors | 2 |
| Valves | 0 |
| Displacement | 1.3 liters |
| Aspiration | Twin Turbo |
|
| Mfg | 1999 JDM Stock Twins |
Exhaust A/R | |
| Model | |
Compressor A/R | |
| Boost PSI | 13 |
Exhaust Trim | |
| | Compressor Trim | |
|
| Cam | ? |
Intake | M |
| Intercooler | S |
Downpipe | M |
| HighFlow Cat | S |
Midpipe | S |
| Cat Back | S |
Street Port | S |
| Bridge Port | S |
Peripheral Port | S |
| Other Port | S |
|
| Name | mazdamike on rx7forum.com |
| Email | |
| WWW | |
| Locations | New York, USA |
| Other Mods: |
|---|
| 99 stock turbos |
|
|
| Make | Mazda |
| Model | RX-7 |
| Year | 1993 |
| Weight | 2800 |
|
| Engine | Rotary |
| Cylinders/Rotors | 2 |
| Valves | 0 |
| Displacement | 1.3 Liters |
| Aspiration | Twin Turbo |
|
| Mfg | BNR Custom Twins |
Exhaust A/R | |
| Model | Stage 3 |
Compressor A/R | |
| Boost PSI | 17 |
Exhaust Trim | |
| | Compressor Trim | |
|
| Cam | ? |
Intake | M |
| Intercooler | M |
Downpipe | M |
| HighFlow Cat | ? |
Midpipe | M |
| Cat Back | M |
Street Port | M |
| Bridge Port | ? |
Peripheral Port | ? |
| Other Port | ? |
|
| Name | spoautos on rx7forum.com |
| Email | |
| WWW | |
| Locations | Birmingham, AL, USA |
| Other Mods: |
|---|
|
|
|
| Make | Mazda |
| Model | RX-7 |
| Year | 1993 |
| Weight | 2800 |
|
| Engine | Rotary |
| Cylinders/Rotors | 2 |
| Valves | 0 |
| Displacement | 1.3 Liters |
| Aspiration | Twin Turbo |
|
| Mfg | Stock Twins |
Exhaust A/R | |
| Model | Stock Twins |
Compressor A/R | |
| Boost PSI | 11 |
Exhaust Trim | |
| | Compressor Trim | |
|
| Cam | ? |
Intake | M |
| Intercooler | S |
Downpipe | M |
| HighFlow Cat | S |
Midpipe | S |
| Cat Back | S |
Street Port | S |
| Bridge Port | S |
Peripheral Port | S |
| Other Port | S |
|
| Name | RatedR1 on rx7forum.com |
| Email | |
| WWW | |
| Locations | |
| Other Mods: |
|---|
|
|
|
| Make | Mazda |
| Model | RX-7 GTU |
| Year | 1990 |
| Weight | 2800 |
|
| Engine | Rotary |
| Cylinders/Rotors | 2 |
| Valves | 0 |
| Displacement | 1.3 Liters |
| Aspiration | NA |
|
| Mfg | None |
Exhaust A/R | |
| Model | |
Compressor A/R | |
| Boost PSI | 0 |
Exhaust Trim | |
| | Compressor Trim | |
|
| Cam | ? |
Intake | M |
| Intercooler | ? |
Downpipe | ? |
| HighFlow Cat | ? |
Midpipe | ? |
| Cat Back | ? |
Street Port | M |
| Bridge Port | ? |
Peripheral Port | ? |
| Other Port | ? |
|
| Name | CJ Brault / pp13bnos on rx7forum.com |
| Email | |
| WWW | |
| Locations | |
| Other Mods: |
|---|
| Dual 2" exaust, HI-6, S-afc, ported intake manifold, mustang dyno |
|
|
| Make | Mazda |
| Model | RX-7 |
| Year | 1993 |
| Weight | 2800 |
|
| Engine | Rotary |
| Cylinders/Rotors | 2 |
| Valves | 0 |
| Displacement | 1.3 liters |
| Aspiration | Twin Turbo |
|
| Mfg | Stock Twins |
Exhaust A/R | |
| Model | |
Compressor A/R | |
| Boost PSI | 13 |
Exhaust Trim | |
| | Compressor Trim | |
|
| Cam | ? |
Intake | M |
| Intercooler | M |
Downpipe | M |
| HighFlow Cat | ? |
Midpipe | M |
| Cat Back | S |
Street Port | ? |
| Bridge Port | ? |
Peripheral Port | ? |
| Other Port | ? |
|
| Name | CJ Brault / pp13bnos on rx7forum.com |
| Email | |
| WWW | |
| Locations | |
| Other Mods: |
|---|
| non sequential turbos, mustang dyno |
|
|
| Make | Mazda |
| Model | RX-7 |
| Year | 1995 |
| Weight | 2800 |
|
| Engine | Rotary |
| Cylinders/Rotors | 2 |
| Valves | 0 |
| Displacement | 1.3 Liters |
| Aspiration | Twin Turbo |
|
| Mfg | Stock Twins |
Exhaust A/R | |
| Model | |
Compressor A/R | |
| Boost PSI | 12 |
Exhaust Trim | |
| | Compressor Trim | |
|
| Cam | ? |
Intake | M |
| Intercooler | M |
Downpipe | M |
| HighFlow Cat | M |
Midpipe | ? |
| Cat Back | ? |
Street Port | S |
| Bridge Port | S |
Peripheral Port | S |
| Other Port | S |
|
| Name | vancouverrx7 on rx7forum.com |
| Email | |
| WWW | |
| Locations | |
| Other Mods: |
|---|
| greddy pulleys |
|
|
| Make | Mazda |
| Model | RX-7 |
| Year | 1993 |
| Weight | 2800 |
|
| Engine | Rotary |
| Cylinders/Rotors | 2 |
| Valves | 0 |
| Displacement | 1.3 Liters |
| Aspiration | Twin Turbo |
|
| Mfg | stock twins |
Exhaust A/R | |
| Model | |
Compressor A/R | |
| Boost PSI | 16 |
Exhaust Trim | |
| | Compressor Trim | |
|
| Cam | ? |
Intake | M |
| Intercooler | M |
Downpipe | M |
| HighFlow Cat | ? |
Midpipe | M |
| Cat Back | M |
Street Port | M |
| Bridge Port | ? |
Peripheral Port | ? |
| Other Port | ? |
|
| Name | Chuck Huang |
| Email | |
| WWW | www.rotaryextreme.com |
| Locations | Albany, CA, USA |
| Other Mods: |
|---|
|
|
|
| Make | Mazda |
| Model | RX-7 |
| Year | 1994 |
| Weight | 2800 |
|
| Engine | Rotary |
| Cylinders/Rotors | 2 |
| Valves | 0 |
| Displacement | 1.3 Liters |
| Aspiration | Twin Turbo |
|
| Mfg | Stock twins |
Exhaust A/R | |
| Model | |
Compressor A/R | |
| Boost PSI | 18 |
Exhaust Trim | |
| | Compressor Trim | |
|
| Cam | ? |
Intake | M |
| Intercooler | ? |
Downpipe | M |
| HighFlow Cat | ? |
Midpipe | M |
| Cat Back | M |
Street Port | S |
| Bridge Port | ? |
Peripheral Port | ? |
| Other Port | ? |
|
| Name | Boostn7 on rx7forum.com |
| Email | |
| WWW | |
| Locations | Union, NJ, USA |
| Other Mods: |
|---|
| Non Sequential Turbos |
|
|
| Make | Datsun |
| Model | 510 |
| Year | |
| Weight | 2160 |
|
| Engine | 12A Rotary |
| Cylinders/Rotors | 2 |
| Valves | 0 |
| Displacement | 1.2 liters |
| Aspiration | Turbo |
|
| Mfg | ITS |
Exhaust A/R | |
| Model | 72 mm dual BB |
Compressor A/R | |
| Boost PSI | 24 |
Exhaust Trim | |
| | Compressor Trim | |
|
| Cam | ? |
Intake | M |
| Intercooler | M |
Downpipe | M |
| HighFlow Cat | ? |
Midpipe | M |
| Cat Back | ? |
Street Port | M |
| Bridge Port | ? |
Peripheral Port | ? |
| Other Port | ? |
|
| Name | 12aTurbo510 on rx7forum.com |
| Email | |
| WWW | www.ammarsgallery.com/510 |
| Locations | |
| Other Mods: |
|---|
|
|
|
| Make | Mazda |
| Model | RX-7 |
| Year | 1995 |
| Weight | 2800 |
|
| Engine | 20B Rotary |
| Cylinders/Rotors | 3 |
| Valves | 0 |
| Displacement | 2.0 Liter |
| Aspiration | Turbo |
|
| Mfg | Turbonetics |
Exhaust A/R | 1.15 |
| Model | T72 |
Compressor A/R | |
| Boost PSI | 14 |
Exhaust Trim | P |
| | Compressor Trim | |
|
| Cam | ? |
Intake | M |
| Intercooler | M |
Downpipe | M |
| HighFlow Cat | ? |
Midpipe | M |
| Cat Back | M |
Street Port | M |
| Bridge Port | ? |
Peripheral Port | ? |
| Other Port | ? |
|
| Name | rx720bt on rx7forum.com |
| Email | |
| WWW | |
| Locations | |
| Other Mods: |
|---|
|
|
|
| Make | Mazda |
| Model | RX-7 |
| Year | 1994 |
| Weight | 2800 |
|
| Engine | Rotary 13B |
| Cylinders/Rotors | 2 |
| Valves | 0 |
| Displacement | 1.3 Liters |
| Aspiration | Turbo |
|
| Mfg | Apexi |
Exhaust A/R | |
| Model | RX-6 |
Compressor A/R | |
| Boost PSI | 14 |
Exhaust Trim | |
| | Compressor Trim | |
|
| Cam | ? |
Intake | M |
| Intercooler | M |
Downpipe | M |
| HighFlow Cat | ? |
Midpipe | M |
| Cat Back | M |
Street Port | M |
| Bridge Port | ? |
Peripheral Port | ? |
| Other Port | ? |
|
| Name | enuttage on rx7club.com |
| Email | |
| WWW | http://www.ladylivewire.com/enuttage/Dyno.jpg |
| Locations | Austin, TX, USA |
| Other Mods: |
|---|
|
|
|
| Make | Mazda |
| Model | RX-7 |
| Year | 1993 |
| Weight | 2800 |
|
| Engine | Rotary 13B |
| Cylinders/Rotors | 2 |
| Valves | 0 |
| Displacement | 1.3 Liters |
| Aspiration | Turbo |
|
| Mfg | Apexi |
Exhaust A/R | |
| Model | RX-6 |
Compressor A/R | |
| Boost PSI | 15 |
Exhaust Trim | |
| | Compressor Trim | |
|
| Cam | ? |
Intake | M |
| Intercooler | M |
Downpipe | M |
| HighFlow Cat | ? |
Midpipe | M |
| Cat Back | M |
Street Port | M |
| Bridge Port | ? |
Peripheral Port | ? |
| Other Port | ? |
|
| Name | 80-CU.IN.T on rx7club.com |
| Email | |
| WWW | |
| Locations | California, USA |
| Other Mods: |
|---|
|
|
|
| Make | Mazda |
| Model | RX-7 |
| Year | 1994 |
| Weight | 2800 |
|
| Engine | Rotary |
| Cylinders/Rotors | 2 |
| Valves | 0 |
| Displacement | 1.3 liters |
| Aspiration | Twin Turbo |
|
| Mfg | Dual Garrett GT30 from M2 Performance |
Exhaust A/R | |
| Model | |
Compressor A/R | |
| Boost PSI | 17 |
Exhaust Trim | |
| | Compressor Trim | |
|
| Cam | ? |
Intake | M |
| Intercooler | M |
Downpipe | M |
| HighFlow Cat | ? |
Midpipe | M |
| Cat Back | M |
Street Port | M |
| Bridge Port | ? |
Peripheral Port | ? |
| Other Port | ? |
|
| Name | artguy on rx7forum.com |
| Email | |
| WWW | |
| Locations | Boston, MA, USA |
| Other Mods: |
|---|
| 3 mm ceramic seals |
|
|
| Make | Mazda |
| Model | RX-7 |
| Year | 1994 |
| Weight | 2750 |
|
| Engine | Rotary |
| Cylinders/Rotors | 2 |
| Valves | 0 |
| Displacement | 1.3 liters |
| Aspiration | Turbo |
|
| Mfg | Apexi |
Exhaust A/R | |
| Model | RX-6 |
Compressor A/R | |
| Boost PSI | 11 |
Exhaust Trim | |
| | Compressor Trim | |
|
| Cam | ? |
Intake | M |
| Intercooler | M |
Downpipe | M |
| HighFlow Cat | ? |
Midpipe | M |
| Cat Back | M |
Street Port | M |
| Bridge Port | ? |
Peripheral Port | ? |
| Other Port | ? |
|
| Name | Jeff Feltman |
| Email | jfeltman@eudoramail.com |
| WWW | www.cardomain.com/id/jeff48 |
| Locations | Southern Illinois, USA |
| Other Mods: |
|---|
|
|
|
| Make | Mazda |
| Model | RX-7 |
| Year | 1994 |
| Weight | 2700 |
|
| Engine | 13B Rotary |
| Cylinders/Rotors | 2 |
| Valves | 0 |
| Displacement | 1.3 Liters |
| Aspiration | Twin Turbo |
|
| Mfg | stock twins |
Exhaust A/R | |
| Model | stock twins |
Compressor A/R | |
| Boost PSI | 13 |
Exhaust Trim | |
| | Compressor Trim | |
|
| Cam | ? |
Intake | M |
| Intercooler | M |
Downpipe | M |
| HighFlow Cat | ? |
Midpipe | M |
| Cat Back | M |
Street Port | S |
| Bridge Port | S |
Peripheral Port | S |
| Other Port | S |
|
| Name | Marshall |
| Email | bramage@bellsouth.net |
| WWW | |
| Locations | |
| Other Mods: |
|---|
| non-sequential turbos |
|
|
| Make | Mazda |
| Model | RX-7 |
| Year | 1994 |
| Weight | 2700 |
|
| Engine | 13B Rotary |
| Cylinders/Rotors | 2 |
| Valves | 0 |
| Displacement | 1.3 Liters |
| Aspiration | Twin Turbo |
|
| Mfg | stock twins |
Exhaust A/R | |
| Model | stock twins |
Compressor A/R | |
| Boost PSI | 13 |
Exhaust Trim | |
| | Compressor Trim | |
|
| Cam | ? |
Intake | M |
| Intercooler | M |
Downpipe | M |
| HighFlow Cat | ? |
Midpipe | M |
| Cat Back | M |
Street Port | S |
| Bridge Port | S |
Peripheral Port | S |
| Other Port | S |
|
| Name | Marshall |
| Email | bramage@bellsouth.net |
| WWW | |
| Locations | |
| Other Mods: |
|---|
|
|
|
| Make | Mazda |
| Model | RX-7 |
| Year | 1993 |
| Weight | 2800 |
|
| Engine | Rotary |
| Cylinders/Rotors | 2 |
| Valves | 0 |
| Displacement | 1.3 liters |
| Aspiration | Turbo |
|
| Mfg | |
Exhaust A/R | |
| Model | |
Compressor A/R | |
| Boost PSI | 30 |
Exhaust Trim | |
| | Compressor Trim | |
|
| Cam | ? |
Intake | M |
| Intercooler | M |
Downpipe | M |
| HighFlow Cat | ? |
Midpipe | M |
| Cat Back | M |
Street Port | M |
| Bridge Port | ? |
Peripheral Port | ? |
| Other Port | ? |
|
| Name | Demetrios/rotor_dee on rx7club.com |
| Email | |
| WWW | |
| Locations | Maryland, USA |
| Other Mods: |
|---|
| race gas |
|
|
| Make | Mazda |
| Model | Rotary Pickup |
| Year | 1974 |
| Weight | 3100 |
|
| Engine | Rotary |
| Cylinders/Rotors | 2 |
| Valves | 0 |
| Displacement | 1.3 liters |
| Aspiration | NA |
|
| Mfg | |
Exhaust A/R | |
| Model | |
Compressor A/R | |
| Boost PSI | 0 |
Exhaust Trim | |
| | Compressor Trim | |
|
| Cam | ? |
Intake | ? |
| Intercooler | ? |
Downpipe | ? |
| HighFlow Cat | ? |
Midpipe | ? |
| Cat Back | ? |
Street Port | ? |
| Bridge Port | ? |
Peripheral Port | M |
| Other Port | ? |
|
| Name | CJ Brault |
| Email | |
| WWW | |
| Locations | Oregon, USA |
| Other Mods: |
|---|
|
|
|
| Make | Mazda |
| Model | RX-7 |
| Year | 1994 |
| Weight | 2730 |
|
| Engine | Rotary |
| Cylinders/Rotors | 2 |
| Valves | 0 |
| Displacement | 1.3 Liters |
| Aspiration | Turbo |
|
| Mfg | |
Exhaust A/R | 0.70 |
| Model | T66 |
Compressor A/R | |
| Boost PSI | 16 |
Exhaust Trim | P |
| | Compressor Trim | |
|
| Cam | ? |
Intake | M |
| Intercooler | M |
Downpipe | M |
| HighFlow Cat | ? |
Midpipe | M |
| Cat Back | M |
Street Port | S |
| Bridge Port | ? |
Peripheral Port | ? |
| Other Port | ? |
|
| Name | Marshall |
| Email | bramage@bellsouth.net |
| WWW | |
| Locations | Marietta, GA, USA |
| Other Mods: |
|---|
|
|
|
| Make | Mazda |
| Model | RX-7 |
| Year | 1993 |
| Weight | 2800 |
|
| Engine | Rotary |
| Cylinders/Rotors | 2 |
| Valves | 0 |
| Displacement | 1.3 liters |
| Aspiration | Turbo |
|
| Mfg | |
Exhaust A/R | 1.00 |
| Model | T04S |
Compressor A/R | 0.70 |
| Boost PSI | 15 |
Exhaust Trim | |
| | Compressor Trim | |
|
| Cam | ? |
Intake | M |
| Intercooler | M |
Downpipe | M |
| HighFlow Cat | ? |
Midpipe | M |
| Cat Back | M |
Street Port | M |
| Bridge Port | ? |
Peripheral Port | ? |
| Other Port | ? |
|
| Name | Wargasm on rx7club.com |
| Email | rx7@zeroglabs.com |
| WWW | www.zeroglabs.com |
| Locations | Maryland, USA |
| Other Mods: |
|---|
| Retarded timing too much over 6500 rpm |
|
|
| Make | Mazda |
| Model | RX-7 |
| Year | 1993 |
| Weight | 2770 |
|
| Engine | 13B Rotary |
| Cylinders/Rotors | 2 |
| Valves | 0 |
| Displacement | 1.3 liters |
| Aspiration | Twin Turbo |
|
| Mfg | 99 spec stock twins |
Exhaust A/R | |
| Model | 99 spec stock twins |
Compressor A/R | |
| Boost PSI | 14 |
Exhaust Trim | |
| | Compressor Trim | |
|
| Cam | ? |
Intake | M |
| Intercooler | M |
Downpipe | M |
| HighFlow Cat | ? |
Midpipe | M |
| Cat Back | M |
Street Port | ? |
| Bridge Port | ? |
Peripheral Port | ? |
| Other Port | ? |
|
| Name | Tim Benton |
| Email | tj93rx7@bellsouth.net |
| WWW | |
| Locations | Georgia, USA |
| Other Mods: |
|---|
|
|
|
| Make | Mazda |
| Model | RX-7 |
| Year | 1988 |
| Weight | 2850 |
|
| Engine | Rotary 13B |
| Cylinders/Rotors | 2 |
| Valves | 0 |
| Displacement | 1.3 liters |
| Aspiration | Turbo |
|
| Mfg | custom specs |
Exhaust A/R | 0.84 |
| Model | BB PT67 |
Compressor A/R | |
| Boost PSI | 16 |
Exhaust Trim | |
| | Compressor Trim | |
|
| Cam | ? |
Intake | M |
| Intercooler | M |
Downpipe | M |
| HighFlow Cat | ? |
Midpipe | M |
| Cat Back | M |
Street Port | M |
| Bridge Port | ? |
Peripheral Port | ? |
| Other Port | ? |
|
| Name | carx7 on rx7club.com |
| Email | |
| WWW | |
| Locations | Tucson, AZ, USA |
| Other Mods: |
|---|
|
|
|
| Make | Mazda |
| Model | RX-7 |
| Year | 1988 |
| Weight | 2850 |
|
| Engine | Rotary 13B |
| Cylinders/Rotors | 2 |
| Valves | 0 |
| Displacement | 1.3 liters |
| Aspiration | Turbo |
|
| Mfg | custom specs |
Exhaust A/R | 0.84 |
| Model | BB PT67 |
Compressor A/R | |
| Boost PSI | 19 |
Exhaust Trim | |
| | Compressor Trim | |
|
| Cam | ? |
Intake | M |
| Intercooler | M |
Downpipe | M |
| HighFlow Cat | ? |
Midpipe | M |
| Cat Back | M |
Street Port | M |
| Bridge Port | ? |
Peripheral Port | ? |
| Other Port | ? |
|
| Name | carx7 on rx7club.com |
| Email | |
| WWW | |
| Locations | Tucson, AZ, USA |
| Other Mods: |
|---|
| 50/50 mix of 91/101 gas |
|
|
| Make | Mazda |
| Model | RX-8 |
| Year | 2004 |
| Weight | 3000 |
|
| Engine | Rotary |
| Cylinders/Rotors | 2 |
| Valves | 0 |
| Displacement | 1.3 liters |
| Aspiration | NA |
|
| Mfg | none |
Exhaust A/R | |
| Model | |
Compressor A/R | |
| Boost PSI | 0 |
Exhaust Trim | |
| | Compressor Trim | |
|
| Cam | ? |
Intake | M |
| Intercooler | S |
Downpipe | S |
| HighFlow Cat | S |
Midpipe | S |
| Cat Back | S |
Street Port | S |
| Bridge Port | S |
Peripheral Port | S |
| Other Port | S |
|
| Name | Rotary Extreme's Intake |
| Email | |
| WWW | |
| Locations | |
| Other Mods: |
|---|
|
|
|
| Make | Mazda |
| Model | RX-7 |
| Year | 1993 |
| Weight | 0 |
|
| Engine | Rotary |
| Cylinders/Rotors | 3 |
| Valves | 0 |
| Displacement | 2.0 liters |
| Aspiration | Turbo |
|
| Mfg | Turbonetics |
Exhaust A/R | |
| Model | ? |
Compressor A/R | |
| Boost PSI | -999 |
Exhaust Trim | |
| | Compressor Trim | |
|
| Cam | ? |
Intake | M |
| Intercooler | M |
Downpipe | M |
| HighFlow Cat | ? |
Midpipe | M |
| Cat Back | M |
Street Port | ? |
| Bridge Port | ? |
Peripheral Port | ? |
| Other Port | ? |
|
| Name | Marquis |
| Email | |
| WWW | http://www.cityperformancecentre.com/customer_cars/drag/dmarquis/specs.htm |
| Locations | |
| Other Mods: |
|---|
| 3 rotor using 13B parts |
|
|
| Make | Mazda |
| Model | RX-7 |
| Year | 1994 |
| Weight | 2800 |
|
| Engine | Rotary |
| Cylinders/Rotors | 2 |
| Valves | 0 |
| Displacement | 1.3 liters |
| Aspiration | Turbo |
|
| Mfg | Garrett |
Exhaust A/R | 1.00 |
| Model | T04S |
Compressor A/R | 0.70 |
| Boost PSI | 15 |
Exhaust Trim | |
| | Compressor Trim | |
|
| Cam | ? |
Intake | M |
| Intercooler | M |
Downpipe | M |
| HighFlow Cat | ? |
Midpipe | M |
| Cat Back | M |
Street Port | M |
| Bridge Port | ? |
Peripheral Port | ? |
| Other Port | ? |
|
| Name | Radkins on rx7club.com |
| Email | |
| WWW | |
| Locations | |
| Other Mods: |
|---|
|
|
|
| Make | Mazda |
| Model | RX-7 |
| Year | 1993 |
| Weight | 2800 |
|
| Engine | Rotary |
| Cylinders/Rotors | 2 |
| Valves | 0 |
| Displacement | 1.3 Liters |
| Aspiration | Turbo |
|
| Mfg | Garrett |
Exhaust A/R | 1.00 |
| Model | T04S |
Compressor A/R | 0.70 |
| Boost PSI | 16 |
Exhaust Trim | |
| | Compressor Trim | |
|
| Cam | ? |
Intake | M |
| Intercooler | M |
Downpipe | M |
| HighFlow Cat | ? |
Midpipe | M |
| Cat Back | M |
Street Port | S |
| Bridge Port | ? |
Peripheral Port | ? |
| Other Port | ? |
|
| Name | Conv.WS6 on rx7club.com |
| Email | |
| WWW | http://www.replicoz.com/rx7.htm |
| Locations | Virginia, USA |
| Other Mods: |
|---|
| KDRotary Anti-Det, Low 12 AFRs |
|
|
| Make | Mazda |
| Model | RX-7 |
| Year | 1987 |
| Weight | 2850 |
|
| Engine | Rotary |
| Cylinders/Rotors | 2 |
| Valves | 0 |
| Displacement | 1.3 liters |
| Aspiration | Turbo |
|
| Mfg | BorgWarner |
Exhaust A/R | 0.83 |
| Model | S300 |
Compressor A/R | |
| Boost PSI | 23 |
Exhaust Trim | |
| | Compressor Trim | |
|
| Cam | ? |
Intake | M |
| Intercooler | M |
Downpipe | M |
| HighFlow Cat | ? |
Midpipe | M |
| Cat Back | M |
Street Port | ? |
| Bridge Port | M |
Peripheral Port | ? |
| Other Port | ? |
|
| Name | Tony Farkas |
| Email | |
| WWW | |
| Locations | |
| Other Mods: |
|---|
|
|
|
| Make | Mazda |
| Model | RX-7 |
| Year | 1988 |
| Weight | 2850 |
|
| Engine | Rotary |
| Cylinders/Rotors | 2 |
| Valves | 0 |
| Displacement | 1.3 liters |
| Aspiration | Turbo |
|
| Mfg | Garrett |
Exhaust A/R | |
| Model | T3/60-1 |
Compressor A/R | |
| Boost PSI | 19 |
Exhaust Trim | |
| | Compressor Trim | |
|
| Cam | ? |
Intake | M |
| Intercooler | M |
Downpipe | M |
| HighFlow Cat | ? |
Midpipe | ? |
| Cat Back | ? |
Street Port | ? |
| Bridge Port | ? |
Peripheral Port | ? |
| Other Port | ? |
|
| Name | unknown |
| Email | |
| WWW | |
| Locations | |
| Other Mods: |
|---|
|
|
|
| Make | Mazda |
| Model | RX-7 |
| Year | 1993 |
| Weight | 2800 |
|
| Engine | Rotary |
| Cylinders/Rotors | 2 |
| Valves | 0 |
| Displacement | 1.3 liters |
| Aspiration | Twin Turbo |
|
| Mfg | 99 spec stock twins |
Exhaust A/R | |
| Model | |
Compressor A/R | |
| Boost PSI | 15 |
Exhaust Trim | |
| | Compressor Trim | |
|
| Cam | ? |
Intake | M |
| Intercooler | M |
Downpipe | M |
| HighFlow Cat | M |
Midpipe | ? |
| Cat Back | M |
Street Port | M |
| Bridge Port | ? |
Peripheral Port | ? |
| Other Port | ? |
|
| Name | SleepR1 on rx7club.com |
| Email | |
| WWW | |
| Locations | Indiana, USA |
| Other Mods: |
|---|
| 99 spec stock twins |
|
|
| Make | Mazda |
| Model | RX-7 |
| Year | 1993 |
| Weight | 2800 |
|
| Engine | Rotary |
| Cylinders/Rotors | 2 |
| Valves | 0 |
| Displacement | 1.3 Liters |
| Aspiration | Twin Turbo |
|
| Mfg | stock twins |
Exhaust A/R | |
| Model | stock twins |
Compressor A/R | |
| Boost PSI | 12 |
Exhaust Trim | |
| | Compressor Trim | |
|
| Cam | ? |
Intake | M |
| Intercooler | S |
Downpipe | M |
| HighFlow Cat | S |
Midpipe | S |
| Cat Back | M |
Street Port | S |
| Bridge Port | ? |
Peripheral Port | ? |
| Other Port | ? |
|
| Name | twinturbo93 on rx7club.com |
| Email | |
| WWW | |
| Locations | |
| Other Mods: |
|---|
| non-seq turbos |
|
|
| Make | Mazda |
| Model | RX-7 |
| Year | 1993 |
| Weight | 2800 |
|
| Engine | Rotary |
| Cylinders/Rotors | 2 |
| Valves | 0 |
| Displacement | 1.3 Liters |
| Aspiration | Twin Turbo |
|
| Mfg | stock twins |
Exhaust A/R | |
| Model | stock twins |
Compressor A/R | |
| Boost PSI | 14 |
Exhaust Trim | |
| | Compressor Trim | |
|
| Cam | ? |
Intake | M |
| Intercooler | S |
Downpipe | M |
| HighFlow Cat | ? |
Midpipe | M |
| Cat Back | M |
Street Port | M |
| Bridge Port | ? |
Peripheral Port | ? |
| Other Port | ? |
|
| Name | neoamd on rx7club.com |
| Email | |
| WWW | |
| Locations | |
| Other Mods: |
|---|
| non-seq turbos |
|
|
| Make | Mazda |
| Model | RX-7 |
| Year | 1993 |
| Weight | 2640 |
|
| Engine | Rotary |
| Cylinders/Rotors | 2 |
| Valves | 0 |
| Displacement | 1.3 Liters |
| Aspiration | Turbo |
|
| Mfg | BNR Twin Turbos |
Exhaust A/R | |
| Model | BNR Twin Turbos |
Compressor A/R | |
| Boost PSI | 17 |
Exhaust Trim | |
| | Compressor Trim | |
|
| Cam | ? |
Intake | ? |
| Intercooler | ? |
Downpipe | ? |
| HighFlow Cat | ? |
Midpipe | ? |
| Cat Back | ? |
Street Port | ? |
| Bridge Port | ? |
Peripheral Port | ? |
| Other Port | ? |
|
| Name | Matt Rivard |
| Email | mrivard@kc.rr.com |
| WWW | |
| Locations | |
| Other Mods: |
|---|
|
|
|
| Make | Mazda |
| Model | GSL-SE |
| Year | 1985 |
| Weight | 2415 |
|
| Engine | Rotary |
| Cylinders/Rotors | 2 |
| Valves | 0 |
| Displacement | 1.3 Liters |
| Aspiration | Turbo |
|
| Mfg | Custom |
Exhaust A/R | |
| Model | Knight Sports S320 T04 hybrid |
Compressor A/R | |
| Boost PSI | 14 |
Exhaust Trim | |
| | Compressor Trim | |
|
| Cam | ? |
Intake | M |
| Intercooler | ? |
Downpipe | M |
| HighFlow Cat | ? |
Midpipe | M |
| Cat Back | M |
Street Port | M |
| Bridge Port | ? |
Peripheral Port | ? |
| Other Port | ? |
|
| Name | Dave |
| Email | gsl-se@winisp.net |
| WWW | http://www.winisp.net/gsl%2Dse/gslse.htm |
| Locations | |
| Other Mods: |
|---|
|
|
|
| Make | Mazda |
| Model | RX-7 |
| Year | 1993 |
| Weight | 2680 |
|
| Engine | Rotary |
| Cylinders/Rotors | 2 |
| Valves | 0 |
| Displacement | 1.3 Liters |
| Aspiration | Turbo |
|
| Mfg | SR Motorsports Stage 2 |
Exhaust A/R | |
| Model | |
Compressor A/R | |
| Boost PSI | 16 |
Exhaust Trim | |
| | Compressor Trim | |
|
| Cam | ? |
Intake | M |
| Intercooler | M |
Downpipe | M |
| HighFlow Cat | ? |
Midpipe | M |
| Cat Back | M |
Street Port | S |
| Bridge Port | ? |
Peripheral Port | ? |
| Other Port | ? |
|
| Name | CJ Brault |
| Email | blackrx7@aol.com |
| WWW | |
| Locations | |
| Other Mods: |
|---|
| Mustang Dyno Results |
|
|
| Make | Mazda |
| Model | RX-7 |
| Year | 1993 |
| Weight | 2800 |
|
| Engine | 13B |
| Cylinders/Rotors | 2 |
| Valves | 0 |
| Displacement | 1.3 Liters |
| Aspiration | Turbo |
|
| Mfg | |
Exhaust A/R | 1.00 |
| Model | T04S |
Compressor A/R | 0.70 |
| Boost PSI | 14 |
Exhaust Trim | P |
| | Compressor Trim | |
|
| Cam | ? |
Intake | M |
| Intercooler | M |
Downpipe | M |
| HighFlow Cat | ? |
Midpipe | M |
| Cat Back | M |
Street Port | M |
| Bridge Port | ? |
Peripheral Port | ? |
| Other Port | ? |
|
| Name | Wargasm on rx7club.com |
| Email | rx7@zeroglabs.com |
| WWW | www.zeroglabs.com |
| Locations | Maryland, USA |
| Other Mods: |
|---|
|
|
|
| Make | Mazda |
| Model | RX-7 |
| Year | 1995 |
| Weight | 2800 |
|
| Engine | Rotary |
| Cylinders/Rotors | 3 |
| Valves | 0 |
| Displacement | 2.0 liters |
| Aspiration | Turbo |
|
| Mfg | |
Exhaust A/R | 1.32 |
| Model | T72 |
Compressor A/R | |
| Boost PSI | 14 |
Exhaust Trim | Q |
| | Compressor Trim | |
|
| Cam | ? |
Intake | M |
| Intercooler | M |
Downpipe | M |
| HighFlow Cat | ? |
Midpipe | M |
| Cat Back | M |
Street Port | M |
| Bridge Port | ? |
Peripheral Port | ? |
| Other Port | ? |
|
| Name | Red-RX7 on rx7club.com |
| Email | |
| WWW | http://home.comcast.net/~mhaun5/rx7/index.html |
| Locations | Kansas, USA |
| Other Mods: |
|---|
|
|
|
| Make | Mazda |
| Model | RX-7 |
| Year | 1993 |
| Weight | 2750 |
|
| Engine | Rotary |
| Cylinders/Rotors | 2 |
| Valves | 0 |
| Displacement | 1.3 Liters |
| Aspiration | Twin Turbo |
|
| Mfg | 1999 stock twins |
Exhaust A/R | |
| Model | 1999 stock twins |
Compressor A/R | |
| Boost PSI | 16 |
Exhaust Trim | |
| | Compressor Trim | |
|
| Cam | ? |
Intake | M |
| Intercooler | M |
Downpipe | M |
| HighFlow Cat | ? |
Midpipe | M |
| Cat Back | M |
Street Port | M |
| Bridge Port | ? |
Peripheral Port | ? |
| Other Port | ? |
|
| Name | Manny Lozano |
| Email | elozano@comcast.net |
| WWW | http://www.opentracking.com/emmanuel_lozano,_93_rx7.htm |
| Locations | Indianapolis, Indiana, USA |
| Other Mods: |
|---|
| Mustang Dyno Results |
|
|
| Make | Mazda |
| Model | RX-7 |
| Year | 1995 |
| Weight | 2800 |
|
| Engine | Rotary |
| Cylinders/Rotors | 2 |
| Valves | 0 |
| Displacement | 1.3 Liters |
| Aspiration | Turbo |
|
| Mfg | Garrett |
Exhaust A/R | 0.94 |
| Model | GT40 |
Compressor A/R | 0.58 |
| Boost PSI | 16 |
Exhaust Trim | 77 mm wheel |
| | Compressor Trim | 82 mm wheel |
|
| Cam | ? |
Intake | M |
| Intercooler | M |
Downpipe | M |
| HighFlow Cat | ? |
Midpipe | M |
| Cat Back | M |
Street Port | M |
| Bridge Port | ? |
Peripheral Port | ? |
| Other Port | ? |
|
| Name | rx7tt95 on rx7club.com |
| Email | |
| WWW | |
| Locations | Florida, USA |
| Other Mods: |
|---|
|
|
|
| Make | Mazda |
| Model | RX-7 |
| Year | 1993 |
| Weight | 2800 |
|
| Engine | Rotary |
| Cylinders/Rotors | 2 |
| Valves | 0 |
| Displacement | 1.3 Liters |
| Aspiration | Turbo |
|
| Mfg | Gotham Racing |
Exhaust A/R | 1.00 |
| Model | GR67 |
Compressor A/R | |
| Boost PSI | 14 |
Exhaust Trim | |
| | Compressor Trim | |
|
| Cam | ? |
Intake | M |
| Intercooler | M |
Downpipe | M |
| HighFlow Cat | ? |
Midpipe | M |
| Cat Back | M |
Street Port | M |
| Bridge Port | ? |
Peripheral Port | ? |
| Other Port | ? |
|
| Name | Steve Kan Customer |
| Email | |
| WWW | |
| Locations | |
| Other Mods: |
|---|
|
|
|
| Make | Mazda |
| Model | RX-7 |
| Year | 1993 |
| Weight | 2800 |
|
| Engine | Rotary |
| Cylinders/Rotors | 2 |
| Valves | 0 |
| Displacement | 1.3 Liters |
| Aspiration | Turbo |
|
| Mfg | Gotham Racing |
Exhaust A/R | 1.00 |
| Model | GR67 |
Compressor A/R | |
| Boost PSI | 17 |
Exhaust Trim | |
| | Compressor Trim | |
|
| Cam | ? |
Intake | M |
| Intercooler | M |
Downpipe | M |
| HighFlow Cat | ? |
Midpipe | M |
| Cat Back | M |
Street Port | M |
| Bridge Port | ? |
Peripheral Port | ? |
| Other Port | ? |
|
| Name | Steve Kan Customer |
| Email | |
| WWW | |
| Locations | |
| Other Mods: |
|---|
|
|
|
| Make | Mazda |
| Model | RX-7 |
| Year | 1993 |
| Weight | 2800 |
|
| Engine | Rotary |
| Cylinders/Rotors | 2 |
| Valves | 0 |
| Displacement | 1.3 Liters |
| Aspiration | Turbo |
|
| Mfg | Gotham Racing |
Exhaust A/R | 1.00 |
| Model | GR67 |
Compressor A/R | |
| Boost PSI | 20 |
Exhaust Trim | |
| | Compressor Trim | |
|
| Cam | ? |
Intake | M |
| Intercooler | M |
Downpipe | M |
| HighFlow Cat | ? |
Midpipe | M |
| Cat Back | M |
Street Port | M |
| Bridge Port | ? |
Peripheral Port | ? |
| Other Port | ? |
|
| Name | Steve Kan Customer |
| Email | |
| WWW | |
| Locations | |
| Other Mods: |
|---|
|
|
|
| Make | Mazda |
| Model | RX-7 |
| Year | 1993 |
| Weight | 2850 |
|
| Engine | Rotary |
| Cylinders/Rotors | 2 |
| Valves | 0 |
| Displacement | 1.3 Liters |
| Aspiration | Turbo |
|
| Mfg | |
Exhaust A/R | 0.84 |
| Model | T04R |
Compressor A/R | |
| Boost PSI | 16 |
Exhaust Trim | |
| | Compressor Trim | |
|
| Cam | ? |
Intake | M |
| Intercooler | M |
Downpipe | M |
| HighFlow Cat | ? |
Midpipe | M |
| Cat Back | M |
Street Port | M |
| Bridge Port | ? |
Peripheral Port | ? |
| Other Port | ? |
|
| Name | BNA_Ellis on nopistons.com |
| Email | |
| WWW | |
| Locations | |
| Other Mods: |
|---|
| Dyno Dynamics dyno results |
|
|
| Make | Mazda |
| Model | RX-7 |
| Year | 1993 |
| Weight | 2800 |
|
| Engine | Rotary |
| Cylinders/Rotors | 2 |
| Valves | 0 |
| Displacement | 1.3 Liters |
| Aspiration | Turbo |
|
| Mfg | stock twins |
Exhaust A/R | |
| Model | stock twins |
Compressor A/R | |
| Boost PSI | 15 |
Exhaust Trim | |
| | Compressor Trim | |
|
| Cam | ? |
Intake | M |
| Intercooler | M |
Downpipe | M |
| HighFlow Cat | ? |
Midpipe | M |
| Cat Back | M |
Street Port | S |
| Bridge Port | S |
Peripheral Port | S |
| Other Port | S |
|
| Name | Patrick |
| Email | fdpatrick@hotmail.com |
| WWW | |
| Locations | San Diego, CA, USA |
| Other Mods: |
|---|
|
|
|
| Make | Mazda |
| Model | RX-7 |
| Year | 1994 |
| Weight | 2850 |
|
| Engine | Rotary |
| Cylinders/Rotors | 2 |
| Valves | 0 |
| Displacement | 1.3 Liters |
| Aspiration | Turbo |
|
| Mfg | Garrett |
Exhaust A/R | 1.00 |
| Model | T04R |
Compressor A/R | |
| Boost PSI | 19 |
Exhaust Trim | |
| | Compressor Trim | |
|
| Cam | ? |
Intake | M |
| Intercooler | M |
Downpipe | M |
| HighFlow Cat | ? |
Midpipe | M |
| Cat Back | M |
Street Port | M |
| Bridge Port | ? |
Peripheral Port | ? |
| Other Port | ? |
|
| Name | spoolin on rx7club.com |
| Email | |
| WWW | http://www.gothamracing.com/pics/Steve/gotham%20turbo%20kit1.jpg |
| Locations | Memphis, TN, USA |
| Other Mods: |
|---|
|
|
|
| Make | Mazda |
| Model | RX-7 |
| Year | 1987 |
| Weight | 2850 |
|
| Engine | Rotary |
| Cylinders/Rotors | 2 |
| Valves | 0 |
| Displacement | 1.3 Liters |
| Aspiration | Turbo |
|
| Mfg | |
Exhaust A/R | 0.84 |
| Model | T70 |
Compressor A/R | |
| Boost PSI | 19 |
Exhaust Trim | |
| | Compressor Trim | |
|
| Cam | ? |
Intake | M |
| Intercooler | M |
Downpipe | ? |
| HighFlow Cat | ? |
Midpipe | M |
| Cat Back | M |
Street Port | M |
| Bridge Port | ? |
Peripheral Port | ? |
| Other Port | ? |
|
| Name | |
| Email | |
| WWW | http://www.idahorotary.com/dyno448.jpg |
| Locations | |
| Other Mods: |
|---|
| Boost drop to 16 at redline, race gas, rich |
|
|
| Make | Mazda |
| Model | RX-7 |
| Year | 1987 |
| Weight | 2850 |
|
| Engine | Rotary |
| Cylinders/Rotors | 2 |
| Valves | 0 |
| Displacement | 1.3 Liters |
| Aspiration | Turbo |
|
| Mfg | |
Exhaust A/R | 0.96 |
| Model | 60-1 |
Compressor A/R | |
| Boost PSI | 15 |
Exhaust Trim | |
| | Compressor Trim | |
|
| Cam | ? |
Intake | M |
| Intercooler | M |
Downpipe | M |
| HighFlow Cat | ? |
Midpipe | M |
| Cat Back | M |
Street Port | S |
| Bridge Port | S |
Peripheral Port | S |
| Other Port | S |
|
| Name | rx_treme on rx7club.com |
| Email | |
| WWW | http://www.idahorotary.com/Jasondyno.jpg |
| Locations | Glendale, AZ, USA |
| Other Mods: |
|---|
|
|
|
| Make | Mazda |
| Model | RX-7 |
| Year | 1987 |
| Weight | 2850 |
|
| Engine | Rotary |
| Cylinders/Rotors | 2 |
| Valves | 0 |
| Displacement | 1.3 Liters |
| Aspiration | Turbo |
|
| Mfg | |
Exhaust A/R | 0.96 |
| Model | 60-1 |
Compressor A/R | |
| Boost PSI | 20 |
Exhaust Trim | |
| | Compressor Trim | |
|
| Cam | ? |
Intake | M |
| Intercooler | M |
Downpipe | M |
| HighFlow Cat | ? |
Midpipe | M |
| Cat Back | M |
Street Port | S |
| Bridge Port | S |
Peripheral Port | S |
| Other Port | S |
|
| Name | rx_treme on rx7club.com |
| Email | |
| WWW | http://www.idahorotary.com/dyno399.jpg |
| Locations | Glendale, AZ, USA |
| Other Mods: |
|---|
| race gas, 2 yrs later, tired engine |
|
|
| Make | Mazda |
| Model | RX-7 |
| Year | 1989 |
| Weight | 2850 |
|
| Engine | Rotary |
| Cylinders/Rotors | 2 |
| Valves | 0 |
| Displacement | 1.3 Liters |
| Aspiration | Turbo |
|
| Mfg | |
Exhaust A/R | |
| Model | |
Compressor A/R | |
| Boost PSI | 10 |
Exhaust Trim | |
| | Compressor Trim | |
|
| Cam | ? |
Intake | M |
| Intercooler | ? |
Downpipe | M |
| HighFlow Cat | ? |
Midpipe | M |
| Cat Back | M |
Street Port | M |
| Bridge Port | ? |
Peripheral Port | ? |
| Other Port | ? |
|
| Name | |
| Email | |
| WWW | http://www.cardomain.com/memberpage/474239 |
| Locations | |
| Other Mods: |
|---|
|
|
|
| Make | Mazda |
| Model | RX-7 |
| Year | 1993 |
| Weight | 2800 |
|
| Engine | Rotary |
| Cylinders/Rotors | 2 |
| Valves | 0 |
| Displacement | 1.3 Liters |
| Aspiration | Turbo |
|
| Mfg | |
Exhaust A/R | |
| Model | T78 |
Compressor A/R | |
| Boost PSI | 10 |
Exhaust Trim | |
| | Compressor Trim | |
|
| Cam | ? |
Intake | M |
| Intercooler | M |
Downpipe | M |
| HighFlow Cat | ? |
Midpipe | M |
| Cat Back | M |
Street Port | M |
| Bridge Port | ? |
Peripheral Port | ? |
| Other Port | ? |
|
| Name | Blaine Carter |
| Email | AIM shayde04 |
| WWW | |
| Locations | |
| Other Mods: |
|---|
|
|
|
| Make | Mazda |
| Model | RX-7 |
| Year | 1987 |
| Weight | 2850 |
|
| Engine | Rotary |
| Cylinders/Rotors | 2 |
| Valves | 0 |
| Displacement | 1.3 Liters |
| Aspiration | Turbo |
|
| Mfg | stock Hitachi |
Exhaust A/R | |
| Model | stock Hitachi |
Compressor A/R | |
| Boost PSI | 11 |
Exhaust Trim | |
| | Compressor Trim | |
|
| Cam | ? |
Intake | M |
| Intercooler | ? |
Downpipe | M |
| HighFlow Cat | ? |
Midpipe | M |
| Cat Back | M |
Street Port | M |
| Bridge Port | ? |
Peripheral Port | ? |
| Other Port | ? |
|
| Name | WookeysRX7 on www.rx7club.com |
| Email | |
| WWW | |
| Locations | Alberta, Canada |
| Other Mods: |
|---|
|
|
|
| Make | Mazda |
| Model | RX-7 |
| Year | 1989 |
| Weight | 2850 |
|
| Engine | Rotary |
| Cylinders/Rotors | 2 |
| Valves | 0 |
| Displacement | 2.0 Liters |
| Aspiration | NA |
|
| Mfg | None |
Exhaust A/R | |
| Model | |
Compressor A/R | |
| Boost PSI | 0 |
Exhaust Trim | |
| | Compressor Trim | |
|
| Cam | ? |
Intake | M |
| Intercooler | ? |
Downpipe | M |
| HighFlow Cat | ? |
Midpipe | M |
| Cat Back | M |
Street Port | S |
| Bridge Port | S |
Peripheral Port | S |
| Other Port | ? |
|
| Name | RETed on www.rx7club.com |
| Email | |
| WWW | |
| Locations | Honolulu, HI, USA |
| Other Mods: |
|---|
|
|
|
| Make | Mazda |
| Model | RX-7 |
| Year | 1994 |
| Weight | 2850 |
|
| Engine | Rotary |
| Cylinders/Rotors | 2 |
| Valves | 0 |
| Displacement | 1.3 Liters |
| Aspiration | Turbo |
|
| Mfg | Garrett |
Exhaust A/R | |
| Model | GT40R |
Compressor A/R | |
| Boost PSI | 12 |
Exhaust Trim | |
| | Compressor Trim | |
|
| Cam | ? |
Intake | M |
| Intercooler | M |
Downpipe | M |
| HighFlow Cat | ? |
Midpipe | M |
| Cat Back | M |
Street Port | M |
| Bridge Port | ? |
Peripheral Port | ? |
| Other Port | ? |
|
| Name | zkeller on rx7club.com |
| Email | |
| WWW | |
| Locations | York, PA, USA |
| Other Mods: |
|---|
| 100 octane fuel |
|
|
| Make | Mazda |
| Model | RX-7 |
| Year | 1994 |
| Weight | 2850 |
|
| Engine | Rotary |
| Cylinders/Rotors | 2 |
| Valves | 0 |
| Displacement | 1.3 Liters |
| Aspiration | Turbo |
|
| Mfg | Garrett |
Exhaust A/R | |
| Model | GT40R |
Compressor A/R | |
| Boost PSI | 19 |
Exhaust Trim | |
| | Compressor Trim | |
|
| Cam | ? |
Intake | M |
| Intercooler | M |
Downpipe | M |
| HighFlow Cat | ? |
Midpipe | M |
| Cat Back | M |
Street Port | M |
| Bridge Port | ? |
Peripheral Port | ? |
| Other Port | ? |
|
| Name | zkeller on rx7club.com |
| Email | |
| WWW | |
| Locations | York, PA, USA |
| Other Mods: |
|---|
| 100 octane fuel |
|
|
| Make | Mazda |
| Model | RX-7 |
| Year | 1994 |
| Weight | 2850 |
|
| Engine | Rotary |
| Cylinders/Rotors | 2 |
| Valves | 0 |
| Displacement | 1.3 Liters |
| Aspiration | Turbo |
|
| Mfg | Garrett |
Exhaust A/R | |
| Model | GT40R |
Compressor A/R | |
| Boost PSI | 22 |
Exhaust Trim | |
| | Compressor Trim | |
|
| Cam | ? |
Intake | M |
| Intercooler | M |
Downpipe | M |
| HighFlow Cat | ? |
Midpipe | M |
| Cat Back | M |
Street Port | M |
| Bridge Port | ? |
Peripheral Port | ? |
| Other Port | ? |
|
| Name | zkeller on rx7club.com |
| Email | |
| WWW | |
| Locations | York, PA, USA |
| Other Mods: |
|---|
| 100 octane fuel |
|
|
| Make | Mazda |
| Model | RX-7 |
| Year | 1993 |
| Weight | 2850 |
|
| Engine | Rotary |
| Cylinders/Rotors | 2 |
| Valves | 0 |
| Displacement | 1.3 Liters |
| Aspiration | Turbo |
|
| Mfg | |
Exhaust A/R | |
| Model | 60-1 |
Compressor A/R | |
| Boost PSI | -999 |
Exhaust Trim | |
| | Compressor Trim | |
|
| Cam | ? |
Intake | M |
| Intercooler | M |
Downpipe | M |
| HighFlow Cat | ? |
Midpipe | M |
| Cat Back | M |
Street Port | M |
| Bridge Port | ? |
Peripheral Port | ? |
| Other Port | ? |
|
| Name | Jose |
| Email | |
| WWW | http://importspeedsouth.com/joserx7.htm |
| Locations | |
| Other Mods: |
|---|
|
|
|
| Make | Mazda |
| Model | RX-7 |
| Year | 1993 |
| Weight | 2850 |
|
| Engine | Rotary |
| Cylinders/Rotors | 2 |
| Valves | 0 |
| Displacement | 1.3 Liters |
| Aspiration | Turbo |
|
| Mfg | Garrett |
Exhaust A/R | |
| Model | T61 |
Compressor A/R | |
| Boost PSI | 15 |
Exhaust Trim | |
| | Compressor Trim | |
|
| Cam | ? |
Intake | M |
| Intercooler | M |
Downpipe | M |
| HighFlow Cat | ? |
Midpipe | M |
| Cat Back | M |
Street Port | S |
| Bridge Port | ? |
Peripheral Port | ? |
| Other Port | ? |
|
| Name | fastrx7man on rx7club.com |
| Email | |
| WWW | |
| Locations | |
| Other Mods: |
|---|
|
|
|
| Make | Mazda |
| Model | RX-7 |
| Year | 1993 |
| Weight | 2850 |
|
| Engine | Rotary |
| Cylinders/Rotors | 2 |
| Valves | 0 |
| Displacement | 1.3 Liters |
| Aspiration | Turbo |
|
| Mfg | Greddy |
Exhaust A/R | |
| Model | T78 |
Compressor A/R | |
| Boost PSI | 19 |
Exhaust Trim | |
| | Compressor Trim | |
|
| Cam | ? |
Intake | M |
| Intercooler | M |
Downpipe | M |
| HighFlow Cat | ? |
Midpipe | M |
| Cat Back | M |
Street Port | M |
| Bridge Port | ? |
Peripheral Port | ? |
| Other Port | ? |
|
| Name | Zavier from rx7club.com |
| Email | |
| WWW | |
| Locations | |
| Other Mods: |
|---|
| race fuel mix |
|
|
| Make | Mazda |
| Model | RX-7 |
| Year | 1994 |
| Weight | 2850 |
|
| Engine | Rotary |
| Cylinders/Rotors | 2 |
| Valves | 0 |
| Displacement | 1.3 Liters |
| Aspiration | Turbo |
|
| Mfg | |
Exhaust A/R | 0.84 |
| Model | 62-1 |
Compressor A/R | |
| Boost PSI | 12 |
Exhaust Trim | P |
| | Compressor Trim | |
|
| Cam | ? |
Intake | M |
| Intercooler | M |
Downpipe | M |
| HighFlow Cat | ? |
Midpipe | M |
| Cat Back | M |
Street Port | M |
| Bridge Port | ? |
Peripheral Port | ? |
| Other Port | ? |
|
| Name | AZ'sFastFD3S on rx7club.com |
| Email | |
| WWW | |
| Locations | Tucson, AZ, USA |
| Other Mods: |
|---|
|
|
|
| Make | Mazda |
| Model | RX-7 |
| Year | 1993 |
| Weight | 2850 |
|
| Engine | 13B |
| Cylinders/Rotors | 2 |
| Valves | 0 |
| Displacement | 1.3 Liters |
| Aspiration | Turbo |
|
| Mfg | Garrett |
Exhaust A/R | |
| Model | T66 |
Compressor A/R | |
| Boost PSI | 16 |
Exhaust Trim | |
| | Compressor Trim | |
|
| Cam | ? |
Intake | M |
| Intercooler | M |
Downpipe | M |
| HighFlow Cat | ? |
Midpipe | M |
| Cat Back | M |
Street Port | M |
| Bridge Port | ? |
Peripheral Port | ? |
| Other Port | ? |
|
| Name | pianoprodigy on rx7club.com |
| Email | |
| WWW | http://www.alantripp.com/410DYNO.jpg |
| Locations | Indian Shores, FL, USA |
| Other Mods: |
|---|
| 100 octane |
|
|
| Make | Mazda |
| Model | RX-7 |
| Year | 1994 |
| Weight | 2850 |
|
| Engine | 13B |
| Cylinders/Rotors | 2 |
| Valves | 0 |
| Displacement | 1.3 Liters |
| Aspiration | Turbo |
|
| Mfg | Garrett |
Exhaust A/R | 1.06 |
| Model | GT35R/T66 Hybrid |
Compressor A/R | |
| Boost PSI | 12 |
Exhaust Trim | |
| | Compressor Trim | |
|
| Cam | ? |
Intake | M |
| Intercooler | M |
Downpipe | M |
| HighFlow Cat | M |
Midpipe | ? |
| Cat Back | M |
Street Port | M |
| Bridge Port | ? |
Peripheral Port | ? |
| Other Port | ? |
|
| Name | paximus on rx7club.com |
| Email | |
| WWW | |
| Locations | Utah, USA |
| Other Mods: |
|---|
| Mustang Dyno Results |
|
|
| Make | Mazda |
| Model | RX-7 |
| Year | 1993 |
| Weight | 2850 |
|
| Engine | 20B |
| Cylinders/Rotors | 3 |
| Valves | 0 |
| Displacement | 2.0 Liters |
| Aspiration | Turbo |
|
| Mfg | Garrett |
Exhaust A/R | |
| Model | 60-1 |
Compressor A/R | |
| Boost PSI | 12 |
Exhaust Trim | |
| | Compressor Trim | |
|
| Cam | ? |
Intake | M |
| Intercooler | M |
Downpipe | M |
| HighFlow Cat | ? |
Midpipe | M |
| Cat Back | M |
Street Port | ? |
| Bridge Port | ? |
Peripheral Port | ? |
| Other Port | ? |
|
| Name | Ed Taylor |
| Email | |
| WWW | |
| Locations | Maryland, USA |
| Other Mods: |
|---|
|
|
|
| Make | Mazda |
| Model | RX-7 |
| Year | 1993 |
| Weight | 2850 |
|
| Engine | 13B |
| Cylinders/Rotors | 2 |
| Valves | 0 |
| Displacement | 1.3 Liters |
| Aspiration | Twin Turbo |
|
| Mfg | BNR Twins |
Exhaust A/R | |
| Model | BNR Twins |
Compressor A/R | |
| Boost PSI | 12 |
Exhaust Trim | |
| | Compressor Trim | |
|
| Cam | ? |
Intake | M |
| Intercooler | M |
Downpipe | M |
| HighFlow Cat | ? |
Midpipe | M |
| Cat Back | M |
Street Port | M |
| Bridge Port | ? |
Peripheral Port | ? |
| Other Port | ? |
|
| Name | GoodfellaFD3S on rx7club.com |
| Email | |
| WWW | |
| Locations | Morristown, NJ, USA |
| Other Mods: |
|---|
|
|
|
| Make | Mazda |
| Model | RX-7 |
| Year | 1989 |
| Weight | 2850 |
|
| Engine | 20B |
| Cylinders/Rotors | 3 |
| Valves | 0 |
| Displacement | 2.0 Liters |
| Aspiration | Turbo |
|
| Mfg | Garrett |
Exhaust A/R | 1.15 |
| Model | GT42 |
Compressor A/R | 0.60 |
| Boost PSI | 8 |
Exhaust Trim | 82 mm 84 Trim |
| | Compressor Trim | 102mm 53 Trim |
|
| Cam | ? |
Intake | M |
| Intercooler | M |
Downpipe | M |
| HighFlow Cat | ? |
Midpipe | M |
| Cat Back | M |
Street Port | S |
| Bridge Port | ? |
Peripheral Port | ? |
| Other Port | ? |
|
| Name | 20B-3Rotor on rx7club.com |
| Email | |
| WWW | |
| Locations | Oshawa, Ontario, CA |
| Other Mods: |
|---|
|
|
|
| Make | Mazda |
| Model | RX-7 |
| Year | 1990 |
| Weight | 2850 |
|
| Engine | 13B |
| Cylinders/Rotors | 2 |
| Valves | 0 |
| Displacement | 1.3 Liters |
| Aspiration | Turbo |
|
| Mfg | |
Exhaust A/R | |
| Model | T04E |
Compressor A/R | |
| Boost PSI | 12 |
Exhaust Trim | |
| | Compressor Trim | 60 |
|
| Cam | ? |
Intake | M |
| Intercooler | M |
Downpipe | M |
| HighFlow Cat | ? |
Midpipe | M |
| Cat Back | M |
Street Port | S |
| Bridge Port | ? |
Peripheral Port | ? |
| Other Port | ? |
|
| Name | DelSlow on rx7club.com |
| Email | |
| WWW | |
| Locations | Marion, OH, USA |
| Other Mods: |
|---|
|
|
|
| Make | Mazda |
| Model | RX-7 |
| Year | 1993 |
| Weight | 2850 |
|
| Engine | 20B |
| Cylinders/Rotors | 3 |
| Valves | 0 |
| Displacement | 2.0 Liters |
| Aspiration | Turbo |
|
| Mfg | unknown |
Exhaust A/R | |
| Model | |
Compressor A/R | |
| Boost PSI | 14 |
Exhaust Trim | |
| | Compressor Trim | |
|
| Cam | ? |
Intake | M |
| Intercooler | M |
Downpipe | M |
| HighFlow Cat | ? |
Midpipe | M |
| Cat Back | M |
Street Port | M |
| Bridge Port | ? |
Peripheral Port | ? |
| Other Port | ? |
|
| Name | Autotech |
| Email | |
| WWW | http://www.autotechmotorsports.com/projects-20bfd.htm |
| Locations | |
| Other Mods: |
|---|
|
|
|
| Make | Mazda |
| Model | RX-7 |
| Year | 1988 |
| Weight | 3100 |
|
| Engine | 13B |
| Cylinders/Rotors | 2 |
| Valves | 0 |
| Displacement | 1.3 Liters |
| Aspiration | Turbo |
|
| Mfg | Mitsubishi |
Exhaust A/R | |
| Model | TD07-25G |
Compressor A/R | |
| Boost PSI | 16 |
Exhaust Trim | |
| | Compressor Trim | |
|
| Cam | ? |
Intake | M |
| Intercooler | M |
Downpipe | M |
| HighFlow Cat | ? |
Midpipe | ? |
| Cat Back | ? |
Street Port | ? |
| Bridge Port | ? |
Peripheral Port | ? |
| Other Port | ? |
|
| Name | Chris Ng |
| Email | chrisyng@gmail.com |
| WWW | |
| Locations | Calgary, AB, Canada |
| Other Mods: |
|---|
|
|
|
| Make | Mazda |
| Model | RX-7 |
| Year | 1993 |
| Weight | 2600 |
|
| Engine | 13B |
| Cylinders/Rotors | 2 |
| Valves | 0 |
| Displacement | 1.3 Liters |
| Aspiration | Turbo |
|
| Mfg | stock twins |
Exhaust A/R | |
| Model | stock twins |
Compressor A/R | |
| Boost PSI | 15 |
Exhaust Trim | |
| | Compressor Trim | |
|
| Cam | ? |
Intake | M |
| Intercooler | M |
Downpipe | M |
| HighFlow Cat | ? |
Midpipe | M |
| Cat Back | M |
Street Port | ? |
| Bridge Port | ? |
Peripheral Port | ? |
| Other Port | ? |
|
| Name | Chuck Westbrook |
| Email | cewrx7r1@yahoo.com |
| WWW | |
| Locations | Houston, TX, USA |
| Other Mods: |
|---|
| non-sequential twins, clipped turbines, ported exhaust only |
|
|
| Make | Mazda |
| Model | RX-7 |
| Year | 1995 |
| Weight | 2850 |
|
| Engine | 13B |
| Cylinders/Rotors | 2 |
| Valves | 0 |
| Displacement | 1.3 Liters |
| Aspiration | Turbo |
|
| Mfg | Garrett |
Exhaust A/R | |
| Model | GT40R |
Compressor A/R | |
| Boost PSI | 17 |
Exhaust Trim | |
| | Compressor Trim | |
|
| Cam | ? |
Intake | M |
| Intercooler | M |
Downpipe | M |
| HighFlow Cat | ? |
Midpipe | M |
| Cat Back | M |
Street Port | M |
| Bridge Port | ? |
Peripheral Port | ? |
| Other Port | ? |
|
| Name | rusty's silver bullet-7 on rx7club.com |
| Email | |
| WWW | |
| Locations | Ft Lauderdale, FL, USA |
| Other Mods: |
|---|
|
|
|
| Make | Mazda |
| Model | RX-7 |
| Year | 1993 |
| Weight | 2850 |
|
| Engine | 13B |
| Cylinders/Rotors | 2 |
| Valves | 0 |
| Displacement | 1.3 Liters |
| Aspiration | Turbo |
|
| Mfg | Garrett |
Exhaust A/R | |
| Model | TS04 |
Compressor A/R | |
| Boost PSI | 19 |
Exhaust Trim | P |
| | Compressor Trim | |
|
| Cam | ? |
Intake | M |
| Intercooler | ? |
Downpipe | M |
| HighFlow Cat | ? |
Midpipe | ? |
| Cat Back | ? |
Street Port | M |
| Bridge Port | ? |
Peripheral Port | ? |
| Other Port | ? |
|
| Name | rob20rx7 on rx7club.com |
| Email | |
| WWW | |
| Locations | Miami, FL, USA |
| Other Mods: |
|---|
| 1987 Turbo II Rotors |
|
|
| Make | Mazda |
| Model | RX-7 |
| Year | 1987 |
| Weight | 2850 |
|
| Engine | 13B |
| Cylinders/Rotors | 2 |
| Valves | 0 |
| Displacement | 1.3 Liters |
| Aspiration | Turbo |
|
| Mfg | stock |
Exhaust A/R | |
| Model | stock |
Compressor A/R | |
| Boost PSI | 11 |
Exhaust Trim | |
| | Compressor Trim | |
|
| Cam | ? |
Intake | ? |
| Intercooler | S |
Downpipe | M |
| HighFlow Cat | ? |
Midpipe | M |
| Cat Back | M |
Street Port | S |
| Bridge Port | ? |
Peripheral Port | ? |
| Other Port | ? |
|
| Name | squagles on teamfc3s.org |
| Email | |
| WWW | |
| Locations | Vancouver, BC, CA |
| Other Mods: |
|---|
|
|
|
| Make | Mazda |
| Model | RX-7 |
| Year | 1987 |
| Weight | 2850 |
|
| Engine | 13B |
| Cylinders/Rotors | 2 |
| Valves | 0 |
| Displacement | 1.3 Liters |
| Aspiration | Turbo |
|
| Mfg | Turbonetics |
Exhaust A/R | 0.81 |
| Model | T70 |
Compressor A/R | |
| Boost PSI | 15 |
Exhaust Trim | |
| | Compressor Trim | |
|
| Cam | ? |
Intake | M |
| Intercooler | M |
Downpipe | M |
| HighFlow Cat | ? |
Midpipe | M |
| Cat Back | M |
Street Port | M |
| Bridge Port | ? |
Peripheral Port | ? |
| Other Port | ? |
|
| Name | Corell |
| Email | |
| WWW | |
| Locations | |
| Other Mods: |
|---|
| boost rise to 19, fade to 14 by redline |
|
|
| Make | Mazda |
| Model | RX-7 |
| Year | 1993 |
| Weight | 2850 |
|
| Engine | 13B |
| Cylinders/Rotors | 2 |
| Valves | 0 |
| Displacement | 1.3 Liters |
| Aspiration | Turbo |
|
| Mfg | Garrett |
Exhaust A/R | 0.84 |
| Model | GT40R |
Compressor A/R | |
| Boost PSI | 20 |
Exhaust Trim | |
| | Compressor Trim | |
|
| Cam | ? |
Intake | M |
| Intercooler | M |
Downpipe | M |
| HighFlow Cat | ? |
Midpipe | ? |
| Cat Back | M |
Street Port | S |
| Bridge Port | ? |
Peripheral Port | ? |
| Other Port | ? |
|
| Name | sk8world on rx7club.com |
| Email | |
| WWW | |
| Locations | Huntsville, AL, USA |
| Other Mods: |
|---|
| race fuel |
|
|
| Make | Mazda |
| Model | RX-7 |
| Year | 1993 |
| Weight | 2850 |
|
| Engine | 13B |
| Cylinders/Rotors | 2 |
| Valves | 0 |
| Displacement | 1.3 Liters |
| Aspiration | Turbo |
|
| Mfg | Garrett |
Exhaust A/R | 0.96 |
| Model | T66 |
Compressor A/R | |
| Boost PSI | 16 |
Exhaust Trim | P |
| | Compressor Trim | |
|
| Cam | ? |
Intake | M |
| Intercooler | M |
Downpipe | M |
| HighFlow Cat | ? |
Midpipe | M |
| Cat Back | M |
Street Port | S |
| Bridge Port | ? |
Peripheral Port | ? |
| Other Port | ? |
|
| Name | mark57 on rx7club.com |
| Email | |
| WWW | |
| Locations | |
| Other Mods: |
|---|
|
|
|
| Make | Mazda |
| Model | RX-7 |
| Year | 1993 |
| Weight | 2850 |
|
| Engine | 13B |
| Cylinders/Rotors | 2 |
| Valves | 0 |
| Displacement | 1.3 Liters |
| Aspiration | Turbo |
|
| Mfg | Garrett |
Exhaust A/R | 0.96 |
| Model | T66 |
Compressor A/R | |
| Boost PSI | 10 |
Exhaust Trim | P |
| | Compressor Trim | |
|
| Cam | ? |
Intake | M |
| Intercooler | M |
Downpipe | M |
| HighFlow Cat | ? |
Midpipe | M |
| Cat Back | M |
Street Port | S |
| Bridge Port | ? |
Peripheral Port | ? |
| Other Port | ? |
|
| Name | mark57 on rx7club.com |
| Email | |
| WWW | |
| Locations | |
| Other Mods: |
|---|
|
|
|
| Make | Mazda |
| Model | RX-7 |
| Year | 1988 |
| Weight | 2850 |
|
| Engine | 13B |
| Cylinders/Rotors | 2 |
| Valves | 0 |
| Displacement | 1.3 Liters |
| Aspiration | Turbo |
|
| Mfg | stock s5 |
Exhaust A/R | |
| Model | stock s5 |
Compressor A/R | |
| Boost PSI | 13 |
Exhaust Trim | |
| | Compressor Trim | |
|
| Cam | ? |
Intake | ? |
| Intercooler | ? |
Downpipe | M |
| HighFlow Cat | ? |
Midpipe | M |
| Cat Back | S |
Street Port | ? |
| Bridge Port | ? |
Peripheral Port | ? |
| Other Port | ? |
|
| Name | Blake_AE on teamfc3s.org |
| Email | |
| WWW | |
| Locations | Canada |
| Other Mods: |
|---|
| 89+ manifold and turbo |
|
|
| Make | Mazda |
| Model | RX-7 |
| Year | 1993 |
| Weight | 2850 |
|
| Engine | 13B |
| Cylinders/Rotors | 2 |
| Valves | 0 |
| Displacement | 1.3 Liters |
| Aspiration | Turbo |
|
| Mfg | Garrett |
Exhaust A/R | 0.84 |
| Model | T66 |
Compressor A/R | |
| Boost PSI | 16 |
Exhaust Trim | P |
| | Compressor Trim | |
|
| Cam | ? |
Intake | M |
| Intercooler | M |
Downpipe | M |
| HighFlow Cat | ? |
Midpipe | M |
| Cat Back | M |
Street Port | S |
| Bridge Port | ? |
Peripheral Port | ? |
| Other Port | ? |
|
| Name | mark57 on rx7club.com |
| Email | |
| WWW | |
| Locations | |
| Other Mods: |
|---|
|
|
|
| Make | Mazda |
| Model | RX-7 |
| Year | 1993 |
| Weight | 2850 |
|
| Engine | 13B |
| Cylinders/Rotors | 2 |
| Valves | 0 |
| Displacement | 1.3 Liters |
| Aspiration | Turbo |
|
| Mfg | |
Exhaust A/R | 0.84 |
| Model | T04R |
Compressor A/R | |
| Boost PSI | 16 |
Exhaust Trim | |
| | Compressor Trim | |
|
| Cam | ? |
Intake | M |
| Intercooler | M |
Downpipe | M |
| HighFlow Cat | ? |
Midpipe | M |
| Cat Back | M |
Street Port | M |
| Bridge Port | ? |
Peripheral Port | ? |
| Other Port | ? |
|
| Name | BNA_Ellis on rx7club.com |
| Email | |
| WWW | |
| Locations | |
| Other Mods: |
|---|
| Dyno Dynamics dyno results |
|
|
| Make | Mazda |
| Model | RX-7 |
| Year | 1993 |
| Weight | 2850 |
|
| Engine | 13B |
| Cylinders/Rotors | 2 |
| Valves | 0 |
| Displacement | 1.3 Liters |
| Aspiration | Turbo |
|
| Mfg | Apexi |
Exhaust A/R | |
| Model | RX-6B |
Compressor A/R | |
| Boost PSI | 14 |
Exhaust Trim | |
| | Compressor Trim | |
|
| Cam | ? |
Intake | M |
| Intercooler | M |
Downpipe | M |
| HighFlow Cat | ? |
Midpipe | M |
| Cat Back | M |
Street Port | M |
| Bridge Port | ? |
Peripheral Port | ? |
| Other Port | ? |
|
| Name | Michael Filippello on rx7club.com |
| Email | |
| WWW | |
| Locations | |
| Other Mods: |
|---|
|
|
|
| Make | Mazda |
| Model | RX-7 |
| Year | 1989 |
| Weight | 2850 |
|
| Engine | 13B |
| Cylinders/Rotors | 2 |
| Valves | 0 |
| Displacement | 1.3 Liters |
| Aspiration | Turbo |
|
| Mfg | stock |
Exhaust A/R | |
| Model | stock |
Compressor A/R | |
| Boost PSI | 8 |
Exhaust Trim | |
| | Compressor Trim | |
|
| Cam | ? |
Intake | M |
| Intercooler | S |
Downpipe | S |
| HighFlow Cat | S |
Midpipe | S |
| Cat Back | S |
Street Port | S |
| Bridge Port | S |
Peripheral Port | S |
| Other Port | S |
|
| Name | Dramon_Killer on nopistons.com |
| Email | |
| WWW | |
| Locations | Tulsa, OK, USA |
| Other Mods: |
|---|
|
|
|
|